Monitor Specifications

Power Management Modes

IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorautomaticallyreducesitspowerconsumptionwhennotinuse.
This is referred to as Power Save Mode. The monitor automatically resumes functioning when the computer detects input from the keyboard, mouse, or other
input devices. The following table shows the power consumption and signaling of this automatic power saving feature:
Activate the computer and the monitor to gain access to the OSD.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments

15-pin D-Sub connector

The following table shows pin assignments in the D-Sub connector:
Left side
Right side
VESA Modes
Horizontal Sync
Vertical Sync
Power Indicator
Power Consumption
Normal operation (with Dell Soundbar and USB active)
Active
Active
Green
75 W (maximum)
Normal operation
Active
Active
Green
35 W (typical)
Active-off mode
Inactive
Inactive
Amber
Less than 2 W
Switch off
-
-
Off
Less than 1 W
NOTE: The OSD only functions in the normal operation mode. One of the following messages appears when the “menu” or “plus”
buttons are pressed when in
Active-off mode.
1. Auto Detect (Analog Input)
In Power Save Mode
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
or
1. Auto Detect (Digital Input)
In Power Save Mode
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
2. Analog Input
In Power Save Mode
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
or
3. Digital Input
In Power Save Mode
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
This monitor is ENERGY STAR®-compliant as well as TCO '99 / TCO '03 power management compatible.
Pin Number
Monitor Side of the 15-pin Side Signal Cable
1
Video-Red
2
Video-Green
3
Video-Blue
4
GND
5
Self-Test
6
GND-R
7
GND-G
8
GND-B
9
DDC +5V
10
GND