Dell SP190SFP appendix Cleaning Your Monitor, Environmental

Dimensions (with stand):

Height

Width

Depth

Dimensions: (without stand)

Height

Width

Depth

Stand dimensions:

Height

Width

Depth

Weight with packaging

Weight with stand assembly and cables

Weight without stand assembly

(For wall mount or VESA mount considerations - no cables)

Weight of stand assembly

Analog: Detachable, D-Sub, 15pins, shipped attached to the monitor

16.56inches (420.5 mm)

16.15inches (410.1 mm)

7.17inches (182.0 mm)

13.31inches (338.1 mm)

16.15inches (410.1 mm)

2.59inches (65.9 mm)

12.66inches (321.5 mm)

10.26inches (260.7 mm)

5.74inches (145.7 mm)

15.11lbs (6.86 kg)

11.9lbs (5.4 kg)

8.81lbs (4 kg)

2.8 lbs (1.27 kg)

Environmental

Please refer to the operation conditions given below to use the monitor correctly.

Temperature:
Operating	5° to 35°C (41° to 95°F)
Nonoperating	Storage: -20° to 60°C (-4° to 140°F)
	Shipping: -20° to 60°C(-4° to 140°F)
Humidity:
Operating	10% to 80% (noncondensing)
Nonoperating	Storage: 5% to 90% (noncondensing)
	Shipping: 5% to 90%(noncondensing)
Altitude:
Operating	3,657.6m (12,000 ft) max
Nonoperating	12,192 m (40,000 ft) max
Thermal dissipation	256.08 BTU/hour (maximum)
	119.5 BTU/hour (typical)

Cleaning Your Monitor

CAUTION: Read and follow the safety instructions before cleaning the monitor.

CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.

•To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.

•Use a slightly-dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.

•If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.

•Handle your monitor with care as darker-colored monitor may scratch and show white scuff marks more than lighter-colored monitor.

•To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.