Manuals / Dell / Computer Equipment / Server

Dell T7610 owner manual POST Behavior, Virtualization Support

Models: T7610

1 81

Download 81 pages 45.18 Kb

Page 60

Table 9. POST Behavior

Option	Description

Deep Sleep Control	Allows you to define the controls when Deep Sleep is enabled.
	•	Disabled (Default)
	• Enabled in S5 only
	• Enabled in S4 and S5
Fan Speed Control	Allows you to control the speed of the system fan. The options are:
	•	Auto (Default)
	•	High
	•	Medium
	•	Low
USB Wake Support	Allows you to enable USB devices to wake the system from standby.
	Default Setting: Disabled
Wake on LAN	This option allows the computer to power up from the off state when triggered by a special
	LAN signal. Wake-up from the Standby state is unaffected by this setting and must be
	enabled in the operating system. This feature only works when the computer is connected
	to AC power supply.
	• Disabled - Does not allow the system to power on by special LAN signals when it
		receives a wake-up signal from the LAN or wireless LAN.
	• LAN Only - Allows the system to be powered on by special LAN signals.
	This option is Disabled by default.
Block Sleep	Allows you to block entering to sleep (S3 state) in OS Environment.
	Default Setting: Disabled
Table 9. POST Behavior

Option	Description

Numlock LED	Specifies if the NumLock function can be enabled when the system boots. This option is
	enabled by default.
Keyboard Errors	Specifies whether keyboard related errors are reported when it boots. This option is
	enabled by default.
Fastboot	Allows you to speed up the boot process by bypassing some compatibility steps. The
	options are:
	• Thorough - This option is enabled by default.
	•	Minimal
	•	Auto

Table 10. Virtualization Support

Option	Description

Virtualization	This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional
	hardware capabilities provided by Intel Virtualization technology.

60

Image 60

Dell T7610 owner manual POST Behavior, Virtualization Support

Contents

Dell Precision Workstation T7610 Owners Manual Regulatory Model D02X Regulatory Type D02X002Notes, Cautions, and Warnings Contents 2 Removing and Installing Components1 Working on Your Computer 4 System Setup 5 Diagnostics6 Troubleshooting Your Computer 3 Additional InformationTechnical Specifications Contacting DellPage Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer After Working Inside Your ComputerPage Page Removing and Installing Components Recommended ToolsSystem Overview Removing the Power Supply Unit PSU Installing the Power Supply Unit PSU1. Follow the procedures in Before Working Inside Your Computer 2. Follow the procedures in After Working Inside Your ComputerInstalling the Front Cover 3. Follow the procedures in After Working Inside Your ComputerRemoving the Front Cover 1. Follow the procedures in Before Working Inside Your ComputerRemoving the Hard Drive 1. Follow the procedures in Before Working Inside Your Computer2. Remove the front cover 3. Pull the clasp of the hard-drive bracket in an outward direction7. Flex the hard-drive bracket on both sides to loosen the hard drive Installing the Hard Drive 5. Follow the procedures in After Working Inside Your ComputerInstalling the Left Cover Removing the Left Cover1. Follow the procedures in Before Working Inside Your Computer 3. Follow the procedures in After Working Inside Your ComputerRemoving the Intrusion Switch Installing the Intrusion Switch4. Follow the procedures in After Working Inside Your Computer Removing the PCI CardInstalling the PCI Card Removing the Slimline Optical Drive4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your Computer4. Disconnect the power cable from the back of the optical drive 3. Disconnect the cable from the back of the optical drivePage Installing the Slimline Optical Drive Removing the Air Tunnel4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Air Tunnel 4. Follow the procedures in After Working Inside Your ComputerInstalling the Memory Removing the Coin-Cell BatteryRemoving the Memory 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Coin-Cell Battery Removing the Heatsink4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Heatsink Removing the Heat-Sink Fan5. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Heatsink Fan Removing the System Fan4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your Computer6. Remove the graphics-card cable from the latch Page 10. Disconnect the system-fan cable connectors from the system board Installing the System Fan 10. Follow the procedures in After Working Inside Your ComputerRemoving the I/O Panel and the USB 3.0 Ports 1. Follow the procedures in Before Working Inside Your Computer3. Disconnect all the cables from the I/O panel Installing the I/O Panel and the USB 3.0 Ports Removing the Power Switch 7. Follow the procedures in After Working Inside Your Computer1. Follow the procedures in Before Working On Your Computer Installing the Power Switch Removing the Speaker5. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Speaker 4. Follow the procedures in After Working Inside Your ComputerRemoving the Right Cover 1. Follow the procedures in Before Working Inside Your Computer2. Remove the screws that secure the right cover to the chassis Installing the Right Cover Removing the 5.25-inch Optical Drive3. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the 5.25-inch Optical Drive Removing the Thermal Sensor5. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your Computer3. Perform the following steps a. Disconnect the thermal-sensor cable from the system boardb. Unroute the thermal-sensor cable through the chassis clips Installing the Thermal Sensor Removing the Processor5. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Processor 6. Follow the procedures in After Working Inside Your Computer Removing the Hard-Drive Fan1. Follow the procedures in Before Working Inside Your Computer 2. Remove a. left cover b. right cover c. PCI cardInstalling the Hard-Drive Fan Removing the Power Supply Unit PSU Card4. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerInstalling the Power Supply Unit PSU Card 1. Install the screws that secure the PSU card to the chassis2. Connect all the cables to the PSU card 3. Install the right cover 4. Follow the procedures in After Working Inside Your ComputerRemoving the System Board 1. Follow the procedures in Before Working Inside Your Computerh. chassis intrusion switch i. coin-cell battery j. PCI card 3. Disconnect all the connectors from the system boardInstalling the System Board 3. Connect the connectors to the system board4. Remove the screws that secure the system board to the chassis 2. Tighten the screws that secure the system board to the chassisSystem Board Components 5. Follow the procedures in After Working Inside Your Computerintrusion-switch connector Page Additional Information Memory Module GuidelinesFront Panel Chassis Lock Power Supply Unit PSU Lock System Setup Boot SequenceNavigation Keys System Setup Options Table 3. System Configuration NOTE If the hard drives are connected to a RAID controller card Table 4. Video Table 5. SecurityTable 6. Secure Boot Table 7. PerformanceDefault Setting Enable Hardware Prefetch Default Setting Enable Dell Reliable MemoryTable 9. POST Behavior Table 10. Virtualization SupportUpdating the BIOS System and Setup Password Assigning a System Password and Setup PasswordDeleting or Changing an Existing System and/or Setup Password Disabling a System Password11. Follow the procedures in After Working Inside Your Computer 1. Follow the procedures in Before Working Inside Your ComputerPage Diagnostics Enhanced Pre-Boot System Assessment ePSA DiagnosticsPage Troubleshooting Your Computer Diagnostic LEDsA possible graphics card failure has occurred Error Messages Errors That Halt Your Computer CompletelyErrors That Do Not Halt Your Computer Errors That Soft Halt Your ComputerTable 15. Errors that do not halt your computer Table 16. - Errors that soft halt your computerDell Reliable Memory Technology RMT has discovered and isolated errors in system memory. You may continue to work. Memory module replacement is recommended. Please refer to the RMT Event log screen in BIOS setup for specific DIMM information Page Technical Specifications Table 17. ProcessorTable 18. System Information Table 19. MemoryTable 20. Video Table 21. AudioTable 22. Network Table 23. Expansion InterfacesTable 25. External Connectors Table 24. Drivessupports one 5.25-inches SATA device or supports one Table 26. Internal Connectors two 164-pin connectors four when optional second processor issolid amber light - the computer does not start, indicating a problem blinking amber light - indicates a problem has occurred with theFront USB Internal USB Front panel control Table 27. Controls and Lightsamber/blinking light - see the service manual for specific diagnostic Table 28. Power4015.3 BTU/Hr at 100 VAC 4365.5 BTU/Hr at 107 VACTable 30. Environmental 40 G +/- 5% with pulse duration of 2 msec +/- 10% equivalent to105 G +/- 5% with pulse duration of 2 msec +/- 10% equivalent to Page Contacting Dell 1. Visit dell.com/support