Dell X50 owner manual Ending a Connection, Connecting Directly to an E-Mail Server

Ending a Connection

To disconnect:

•When connected through dial-up or VPN, tap the connection

icon, , on your navigation bar and tap End.

•When connected through a cable or cradle, detach your device from the cable or cradle.

•When connected through the infrared sensor, move the device away from the computer.

•When connected through a network (Ethernet) card, remove the card from your device.

Connecting Directly to an E-Mail Server

You can set up a connection to an e-mail server so that you can send and receive e-mail messages by using a modem or network connection and Messaging on your device.

NOTE: The ISP or network must use a POP3 or IMAP4 e-mail server and an SMTP gateway.

You can use multiple e-mail services to receive your messages. For each e-mail service you intend to use, you must first set up and name the e-mail service. If you use the same service to connect to different mailboxes, set up and name each mailbox connection.

To set up an e-mail service:

1In Messaging on your device, tap Accounts and tap New Account.

2Follow the directions in the E-mail Setup wizard.

For more information, tap the Start button and tap Help.

To connect to your e-mail server, tap Account and tap Connect. For more information on using the Messaging program, see "Messaging" on page 64.

Getting Connected

97