Dell XPS H266, XPS H233 manual Inch Drive Removal

5.25-Inch Drive

drive-mounting screws (3)

Figure 4-6. 5.25-Inch Drive Removal

To remove a drive from a 5.25-inch drive bay, follow these steps:

1.Remove the front bezel.

2.Remove the drive cage and drives as an assembly.

3.Remove the three drive-mounting screws, and slide the drive out of the bay.

When you replace a drive, be sure to set the jumpers on the replacement drive the same as the jumpers on the drive you removed. For additional information about jumper settings on EIDE drives, see “EIDE Subsystem” in Chapter 1.

4-6 Dell Dimension XPS H233 and XPS H266 Systems Service Manual