Dell Z01G Before Working Inside Your Alienware Graphics Amplifier

Before Working Inside Your

CAUTION: To avoid damaging the components and cards, handle

them by their edges and avoid touching pins and contacts.

NOTE: The images in this document may differ from your device

depending on the configuration you ordered.

1 Disconnect your device and all attached devices from their electrical

outlets.

2 Disconnect all cables such as telephone cables, network cables and so

on, from your device.

3 Disconnect all attached peripherals, such as keyboard, mouse, monitor,

and so on, from your device.

Use the following safety guidelines to protect your device from potential

damage and ensure your personal safety.

WARNING: Before working inside your device, read the safety

information that ships with your device. For more safety best

practices, see the Regulatory Compliance home page at dell.com/

regulatory_compliance.

WARNING: Disconnect all power sources before opening the device

cover or panels. After you finish working inside the device, replace all

covers, panels, and screws before connecting to the power source.

CAUTION: To avoid damaging the device, make sure that the work

surface is flat and clean.

CAUTION: To avoid damaging the components and cards, handle

them by their edges and avoid touching pins and contacts.