REPAIRS
Replacing the supply cable
Turn the cooktop over and unhook the terminal board cover by inserting a screwdriver into the two hooks “A”.
Open the cable gland by unscrewing screw “F”, unscrew the terminal screws and remove the cable.
The new supply cable, of suitable type and section, is connected to the termi- nal board following the diagrams shown below.
SECTION OF THE SUPPLY CABLE
Use
section: 3 x 1,5 mm2
Figure 5
A |
Figure 6
F |
8
WARNING: If the power supply cable is damaged, it must be replaced only by an authorised service agent in order to avoid a hazard.
Figure 7
220-240 V 
E 
Earth
N Neutral
L Live
LN
E
