USE AND CARE
CAUTION:
■■ This appliance must be used only for the task it has explicitly been designed for, that is for domestic cooking of foodstuffs. Any other form of usage is to be considered as inappropriate and therefore dangerous.
■■ Do NOT place combustible materials or products on this appliance at any time.
USING THE OVEN FOR THE FIRST TIME
Operate as follows:
■■ Assemble the wire racks on the oven walls using the 2 screws interposing the catalytic panels “A” with the arrow up (fig. 9a). The catalytic panel with the hole for the side oven lamp must be po- sitioned on the left oven wall. DO NOT INTERPOSE THE CATALYTIC PANEL WITHOUT THE HOLE ON THE LEFT OVEN WALL.
■■ Slide in the grease filter on the back of the oven as in fig. 10.
■■ Slide into the guides, the shelf and the tray (fig. 9b).
The rack must be fitted so that the safe- ty notch, which stops it sliding out, faces the inside of the oven; the guard rail shall be at the back.
The tray must be fitted so that the safe- ty notch, which stops it sliding out, faces the inside of the oven.
■■ To eliminate traces of grease in manu- facture it is necessary to preheat the oven at the maximum temperature:
•For 60 minutes in the 
position, for
30 minutes in the 
position and for another 15 minutes in the 
position.
■■ Unscrew the fixing screws and slide off the wire racks and the catalytic liners to the oven wall as in fig. 9a.
The grill is secured to the rear wall of the oven on a hinge system that allows it to be lowered to allow proper access when cleaning the oven ceiling (see next chap- ter TILTING GRILL).
■■ Let the oven cool down, switch off the electrical supply, then clean the inside of the oven with a cloth soaked in water and neutral detergent and dry thoroughly.
Figure 9a
A | A |
Figure 9b
Guard rail | Stop notch |
| Stop notch |
14
