DeLonghi DEBIG 24 SS cleaning and maintenance, Very Important, General Recomandation, Safety

Models: DEBIG 24 SS

1 28
Download 28 pages 44.36 Kb
Page 12
Image 12
cleaning and maintenance

cleaning and maintenance

WARNING

VERY IMPORTANT

Before any operation of maintenance disconnect the appliance from the electrical mains supply.

Do not use a steam cleaner because the moisture can get into the appliance thus make it unsafe.

GENERAL RECOMANDATION

Important: Before any operation of cleaning and maintenance disconnect the appliance from the electrical supply.

It is advisable to clean when the appliance is cold and especially for cleaning the enamelled parts.

Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the surfaces.

Avoid using cleaning products with a chlorine or acidic base.

The oven must always be cleaned after every use, using suitable products and keeping in mind that its operation for 30 minutes on the highest temperature eliminates most grime reducing it to ashes.

The use of suitable protective clothing/gloves is recommended when handling, cleaning this appliance.

ENAMELLED PARTS

All the enamelled parts must be cleaned with a sponge and soapy water only or other non-abrasive products.

Dry preferably with a chamois leather.

STAINLESS STEEL, PAINTED AND ALUMINIUM PARTS AND SILK-SCREEN PRINTED SURFACES

Clean using an appropriate product. Always dry thoroughly.

IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abrasion. You are advised to use a soft cloth and neutral soap.

ONLY SOAP/WARM WATER MUST BE USED TO CLEAN THE STAINLESS STEEL SURFACES.

G

Fig. 4.1

Do not use this step

Safety
catch

Fig. 4.2

INSIDE OF OVEN

This must be cleaned regularly.

Remove and refit the side runner frames as described on the next chapter.

With the oven warm, wipe the inside walls with a cloth soaked in very hot soapy water or another suitable product.

Side runner frames, lower panel and rack can be removed and washed in the sink.

OVEN ACCESSORIES INSTALLATION AND REMOVAL

Hang up the wire racks “G” on the oven walls (fig. 4.1).

Slide in, on the guides, the shelf etc. (fig. 4.2).

The rack must be fitted so that the safety catch, which stops it sliding out, faces the inside of the oven.

Position the broiler pan above the oven shelf.

To dismantle, operate in reverse order.

12

Page 12
Image 12
DeLonghi DEBIG 24 SS cleaning and maintenance, Very Important, General Recomandation, Enamelled Parts, Inside Of Oven