“Hi-light” double zoneS (figs. 25, 26)

■■ The heating element is formed of 2 coils of resistant material which reaches the wor- king temperature quickly.

■■ This zone is controlled by a continuous energy regulator switch (fig. 24). The heat intensity can be regulated continuously from “0” to “12” (max).

■■ Check that the hob is clean and then switch on by turning the control knob. ■■ When the hob is working, the power on indicator light will be on.

■■ To turn on both zones of the double element, turn the double element knob fully clockwise to the position .

To reduce the heat of the full double element, turn its knob anticlockwise to setting “12” or lower. Adjust the heat during cooking as necessary.

Note: if you leave the knob at the position, the full double element will re-

main at the highest heat setting.Figure 24

■■ To return to using only the inner zone of the double element, first turn the knob to the “0“ (off) position (you should feel a click) and then clockwise to a setting from “1” to “12”.

Figure 25

Second element

Figure 26

Second element

DOUBLE ZONE

DOUBLE ZONE (OVAL)

21

Page 21
Image 21
DeLonghi DEF905E manual Hi-light double zoneS figs, Second element, Double Zone Double Zone Oval