Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to the value indicated on the rating plate on the bottom of the appliance.
Connect the appliance to an earthed and correctly installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified professional.
Using the appliance for the first time
|
| Please note! |
|
| |
t | $PòFFIBTCFFOVTFEUPGBDUPSZUFTUUIFBQQMJBODFBOEJU | |
| is therefore completely normal for there to be traces of | |
| coffee in the mill. | |
| The machine is, however, guaranteed to be new. | |
t | :PVTIPVMEDVTUPNJTFXBUFSIBSEOFTTBTTPPOBTQPTTJCMF | |
| following the instructions in the section “Setting the | |
| water hardness”on page 18. | |
1.Insert the power cable connector into the socket at the back of the appliance and connect the appliance to the
mains electricity supply (fig. 1). Make sure the main switch at the back of the appliance is pressed (fig. 2).
You must first choose the language (the languages scroll through at intervals of about 3 seconds).
2.When “English” appears, press and hold the 
button (fig. 3) for a few seconds until “English set” is
displayed.
Follow the instructions displayed by the appliance:
3.“FILL TANK!”: remove the water tank (fig. 4), fill to the MAX line with fresh water then replace in the appliance.
4.“INSERT WATER SPOUT!”: Check that the hot water spout is inserted on the nozzle and place a container with a minimum capacity of 100 ml underneath (fig. 6).
5.“Hot water... Press OK?”is displayed;
6. Press | the | button to confirm (fig. 3). The |
appliance delivers water from the spout then goes off | ||
automatically. |
| |
The coffee | maker is now ready for normal use. | |
Please note!
t 8IFOVTJOHUIFBQQMJBODFGPSUIFöSTUUJNFZPVOFFEUP make
t 5PIFMQSFEVDFUIFCVJMEVQPGMJNFTDBMFJOUIFBQQMJBODF and soften the water taste, we recommend installing a water filter as described in the section “WATER FILTER”.
If your model is not provided with a filter, you can request one from De’Longhi Customer Experience.
TURNING THE APPLIANCE ON
Please note!
Before turning the appliance on, make sure the main switch on the back of the appliance is pressed (fig. 2).
Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coffee spouts and is collected in the drip tray underneath.
Avoid contact with splashes of water.
t 5PUVSOUIFBQQMJBODFPOQSFTTUIF 
button (fig. 7).
The message “Heating up... Please wait”is displayed. After heating, the message “Rinsing...” is displayed. As well as heating the boiler, the appliance also heats the internal circuits by circulating hot water.
The appliance has reached the required temperature when a message is displayed indicating the coffee taste and quantity.
TURNING THE APPLIANCE OFF
Each time the appliance is turned off, it performs an automatic rinse cycle which cannot be interrupted.
Danger of burns!
During rinsing, a little hot water flows from the coffee spouts. Avoid contact with splashes of water.
To turn the appliance off, press the 
button (fig. 7).
The appliance performs a rinse cycle, then the message “Turning off underway Please wait...” is displayed and the appliance goes off.
Please note!
If the appliance is not used for an extended period, switch off the machine at the main switch (fig. 2).
Important!
To avoid damaging the appliance, never switch the appliance off at the main switch before it has been turned off using the 
button.
9
