DeLonghi ECAM26455 manual Menu Settings

MENU SETTINGS

When you access the programming menu by pressing the MENU/ESC button, the following menu items are available:

Rinsing

Use this function to deliver hot water from the spout to heat the internal circuit and make the coffee delivered hotter.

To enable the function, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the HOT MILK or LATTE button (fig. 8) until“Rinsing” is displayed;

3.Press the button. The message “Confirm?” is

displayed;

3.Press the button (fig. 3). Hot water flows out of the spout, heating the internal circuit and making the

coffee delivered hotter.

Descale

For instructions on descaling, see page 17.

Adjust time

To adjust the time on the display, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the HOT MILK or LATTE button (fig. 8) until “Adjust time”is displayed;

3.Press the button (fig. 3);

4.Press the HOT MILK or LATTE button (fig. 8) to change the hours;

5.Press the button to confirm;

6.Press the HOT MILK or LATTE button (fig. 8) to change the minutes;

7.Press the button to confirm.

This sets the time. Press the MENU/ESC button to exit the menu.

Auto-off

The appliance is set to turn off automatically if not used for 2 hours.

The time can be changed so that the appliance switches off after 15 or 30 minutes, or after 1, 2 or 3 hours.

To re-programme Auto-off, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the HOT MILK or LATTE button (fig. 8) until “Auto- off”is displayed;

3.Press the button;

4.Press the HOT MILK or LATTE button (fig. 8) until the desired operation time is displayed (15 or 30 minutes, or 1, 2 or 3 hours);

5.Press the button to confirm;

6.Press the MENU/ESC button to exit the menu.

Auto-off is programmed.

Auto-start

You can set the auto-start time in order to have the appliance ready at a certain time (for example in the morning) so you can make coffee immediately.

Please note!

To enable this function, the time must already have been set correctly.

To enable Auto-on, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the HOT MILK or LATTE button (fig. 8) until “Auto- start”is displayed;

3.Press the button. “Enable?”is displayed;

4.Press the button to confirm;

5.Press the HOT MILK or LATTE button to choose the hours;

6.Press the button to confirm;

7.Press the HOT MILK or LATTE button (fig. 8) to change the minutes;

8.Press the button to confirm;

9.Press the MENU/ESC button to exit the menu.

Once the time has been confirmed, enabling of auto-start is

indicated by the symbol displayed alongside the time and under the Auto-start item in the menu.

To disable the function:

1.Select auto-start from the menu;

2.Press the button. “Disable?” is displayed;

3.Press the button to confirm.

The symbol is no longer displayed.

Setting the temperature

To modify the temperature of the water used to make the coffee, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the HOT MILK or LATTE button (fig. 8) until “Set temperature”is displayed;

3.Press the button;

4.Press the HOT MILK or LATTE button until the required temperature (●= low, ●●●● = high) is displayed;

5.Press the button to confirm;

6.Press the MENU/ESC button to exit the menu.

Energy Saving

Use this function to enable or disable energy saving mode. When enabled, the function reduces energy consumption in compliance with European regulations. To disable (or enable) “energy saving”mode, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the HOT MILK or LATTE button (fig. 8) until “Energy saving”is displayed;

3.Press the button. “Disable?” is displayed (or

10