MAKING COFFEE
Selecting the coffee taste
The appliance is set by default to make coffee with a standard taste.
You can also choose one of these tastes:
Mild taste Standard taste Strong taste
To change the taste, press the 
button (fig. 9) repeatedly until the required taste is displayed.
Selecting the quantity of coffee in the cup
The appliance is set by default to make a standard quantity of coffee.
To select the quantity of coffee, press the 
button (fig. 10) until the message corresponding to the required quantity of coffee is displayed:
Coffee selected | Quantity in cup (ml) |
|
|
MY COFFEE | Programmable: |
| from ≃20 to ≃180 |
ESPRESSO | ≃40 |
STANDARD | ≃60 |
|
|
LONG | ≃90 |
EXTRA LONG | ≃120 |
|
|
Customising the “my coffee” quantity
The appliance is set by default to automatically deliver 30 ml of “my coffee”.
To modify this quantity, proceed as follows:
1.Place a cup under the coffee spouts (fig. 14).
2.Press the 
button (fig. 10) until “MY COFFEE” is displayed.
3.Keep the 
button (fig. 11) pressed until the message “1 MY COFFEE Program quantity” is displayed and coffee
delivery begins. Release the button.
4.As soon as the coffee in the cup reaches the required level,
press the button 
(fig. 11) again.
The quantity of coffee in the cup has now been programmed.
Adjusting the coffee mill
The coffee mill is preset in the factory to make coffee correctly and should not require adjusting initially.
However, if after making the first few coffees you find that the
coffee is too thin and not creamy enough or that delivery is too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment dial (fig. 12).
Please note!
The grinding adjustment dial must only be turned when the coffee mill is in operation.
If the coffee is delivered too slowly
or not at all, turn one click clockwise
towards “7”.
For fuller bodied creamier coffee on the other hand, turn one click anticlockwise towards “1”(do not turn more than one
click at a time otherwise the coffee could be delivered a drop at a time).
These adjustments will only be evident after at least 2 cups of coffee have been delivered.
If this adjustment does not obtain the desired result, turn the dial another click.
Tips for a hotter coffee
For a hotter coffee, before delivery you are recommended to:
t QFSGPSNBSJOTFDZDMFCZTFMFDUJOHUIFi3JOTJOHwGVODUJPOJO the settings menu (page 10)
t XBSN UIF DVQT XJUI IPU XBUFS VTJOH UIF IPU XBUFS function);
t JODSFBTF UIF DPòFF UFNQFSBUVSF JO UIF TFUUJOHT NFOV (page 10).
Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans as they could stick to the coffee mill and make it unusable.
1.Place coffee beans in the coffee bean container (fig. 13).
2.Place under the coffee dispensing spouts, either:
-1 cup if you want one coffee (fig. 14);
-2 cups if you want 2 coffees.
3.Lower the spouts as near as possible to the cup.This makes a creamier coffee (fig. 15).
4.Press the button corresponding to the number of coffees
required (1 cup | or 2 cups | , figs. 11 and |
16). |
|
|
5.Preparation begins. The amount of coffee selected is displayed together with a progress bar which gradually fills as preparation progresses.
Please note:
t 8IJMFUIFDPòFFNBLFSJTNBLJOHDPòFFEFMJWFSZDBOCF interrupted at any moment by pressing one of the two
12
