ELECTRONIC SHUTTER
When using a trigger pulse like shown below, set the TRIG polarity selector switch on the rear panel to
T
A:4.0 to 5.0 V
B:0 to 2.0 V
A
B
T: 2 ∝s to 1/4 s, 100 ∝s to 1/4 s when setting the shutter speed using DIP switch
*
*
Input impedance: 10 kΩ or more
The voltage and pulse width used are measured at pin 11 of a
Specifications of WEN (Write ENable Pulse)
A
B
T
A:5.0 V
B:0 V
T:15.875 ms
*Output impedance: 10 kΩ or more
10
