Main
Table of Contents
OUTLINE
MAIN FEATURES
SYSTEM CONFIGURATION
The components making up the system based on XC-E series video camera are as follows.
SPECIFICATIONS COMPARISON
MAIN SPECIFICATIONS
*
4
MAIN SPECIFICATIONS
CONNECTION DIAGRAM
Note
Restart Reset function F
External synchronization for each mode
LOCATION OF PARTS AND OPERATION
1Lens mount section (C mount)
2
5 6
Factory-setting mode of rear panel
PHASE CONDITIONS OF EXTERNAL SYNCHRONIZATION
External synchronization for each mode
For normal video/normal shutter
For Restart Reset (RR)/external trigger shutter
Phase conditions
ELECTRONIC SHUTTER
*
*
Setting of normal shutter speed
DIP switch on the rear panel
*
Setting of external trigger shutter speed
**
*
There are two ways to set the shutter speed.
* *
* *
Specifications of WEN (Write ENable Pulse)
*
RESTART RESET (R.R)
Example 1 of Long exposure
Long exposure
Timing and conditions
12
RESTART RESET (R.R)
Example 2 of long exposure
FRAME IMAGE OUTPUT WITH STROBE LIGHT
Note
Timing and conditions
<Timing chart by restart/reset>
14
OUTPUT WAVEFORM TIMING CHART (XC-ES50/EI50/ES30/EI30(EIA))
Timing chart of vertical output waveform (2:1 interlaced frame integration)
Timing chart of horizontal output waveform
HD
Camera video output signal (Typical value)
15
ELECTRONIC SHUTTEROUTPUT WAVEFORM TIMING CHART (XC-ES50/EI50/ES30/EI30(EIA))
Timing chart of vertical output waveform (2:1 interlaced field integration)
16
OUTPUT WAVEFORM TIMING CHART (XC-ES50CE/EI50CE/ES30CE/EI30CE (CCIR))
Timing chart of vertical output waveform (2:1 interlaced frame integration)
Timing chart of horizontal output waveform
HD
17
OUTPUT WAVEFORM TIMING CHART (XC-ES50CE/EI50CE/ES30CE/EI30CE (CCIR))
Timing chart of vertical output waveform (2:1 interlaced field integration)
SENSOR READ CLOCK TIMING CHART
XC-ES30
XC-ES30CE
XC-ES50
XC-ES50CE
XC-EI30
XC-EI30CE
XC-EI50
XC-EI50CE
22
TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1
*
Te = Trigger width + 120 s (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE)
*
*
*
output.
Trigger
External HD
External VD (
*
: An image is superimposed when the next exposure ends before the previous image is output.
phase of the VD signal coincide with the falling edge of the HD signal during input operation.
Te = Trigger width + 120 s (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE)
*
*
*
output.
* *
*
External HD
* *
*
Continuous HD/VD input
*
: An image is superimposed when the next exposure ends before the previous image is output.
sure to input both HD and VD signals.
*
* *
*
External HD
Video out WEN
*
: An image is superimposed when the next exposure ends before the previous image is output.
signal coincide with the falling edge of the HD signal.
*
*
Video out WEN
External HD
External VD (Single VD)
*
: An image is superimposed when the next exposure ends before the previous image is output.
* *
Trigger
Video out WEN
*
*
Te = Trigger width + 120 s (XC-ES50CE/ES30CE, XC-EI50CE/EI30CE)
*
the VD signal.
29
TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 2 (RESET MODE)
*
*
DIMENSIONS
XC-ES50/50CE, XC-EI50/EI50CE XC-ES30/30CE, XC-EI30/EI30CE (XC-ES30 model)
SPECTRAL RESPONSE CHARACTERISTICS
XC-ES30
XC-ES30CE
XC-ES50
XC-ES50CE
XC-EI30
XC-EI30CE
XC-EI50
XC-EI50CE
VARIOUS LENS SELECTION
The following shows the various lens specifications of the accessories available.
XC-ES50/50CE, XC-ES30/30CE XC-EI50/50CE, XC-EI30/30CE compatibility
List of C-Mount Lens
Page
CCD B/W VIDEO CAMERA MODULE
XC-ES50/50CE XC-ES30/30CE XC-EI50/50CE XC-EI30/30CE
USA
Japan
Europe
00B
15