Attention!
For installation please use the car radio's ISO connections. The vehicle specific ISO adapter that you may possibly require can be obtained from a specialist establishment, from a local dealer or from the store's technical department. When using other connection types the warranty becomes void!
Observe the cable positioning when pushing the radio in; it could become damaged.
Antenna power connection
The connection for the antenna power is available for a relay controlled antenna. The relay then automatically extends the antenna when the radio is switched on. When switched off the antenna retracts.
This connection can also be used to control an external amplifier. For exact connection informa- tion please consult the amplifier's operating in- structions.
Never attach the antenna power connection with the antenna's motor power cable; this can cause damage to the radio!
Connection schematic
Antenna
4 |
8 |
1 | 2 | 3 | 4 |
|
|
|
| 8 | ISO B |
|
|
|
|
ISO A
External amplifier
Microphone unit
Connecting an external audio device to the car radio
•Connect the audio output of an external audio device (i.e. an MP3 player) via a 3.5 mm stereo jackplug to the socket AUX IN on the front panel of the device.
•Select playback of the audio input by pressing, several times, the MD/LD button until AUX is shown in the display.
Backup connection
Make sure that for the station memory the per- manent positive is applied to the connection 6 in the ISO block A. Otherwise you will not be able to save any radio stations!
•After all connections have been made activate the RESET button with a ball point pen or other pointed object.
•Attach the face plate as described under “Putting the face plate in”.
Disassembling the device
• To disassemble the device first remove the bezel frame and then feed the right and left keys into the respective slots on the sides of the device.
The tabs are now bent back and you can pull the device out.
- 56 -
