Sony XC-ES50/50CE manual Outline, Main Features

XC-E series

OUTLINE

The XC-ES30/30CE, XC-ES50/50CE, XC-EI30/30CE, and XC-EI50/50CE are industrial black-and-white video camera modules, each using a 1/3- or 1/2-inch IT CCD. The 1/3- and 1/2-inch C mount commonly used in industrial applications implements compact size and lightweight. Switching of each mode on the rear panel, which has been installed from the XC-ST series, is followed to provide improved operability. The XC-EI series uses a CCD which is sensitive on a near infrared area to capture a clear image even in low-intensity illumination. As with the existing devices, the XC- ES30/30CE, XC-ES50/50CE, XC-EI30/30CE, and XC-EI50/50CE incorporate significant shock and vibration resistance to support installation on FA equipment.

MAIN FEATURES

1/3" and 1/2" IT CCD

A CCD sensitive on a near infrared area is used for the XC-EI series.

External trigger shutter function

(XC-ES50/ES30, XC-EI50/EI30: 1/4 to 1/10,000 seconds,

XC-ES50CE/ES30CE, XC-EI50CE/EI30CE: 1/4 to 1/8,000 seconds)

Restart Reset (R.R) function

Inputting HD and VD signals (2 VD or more) continuously from the outside can catch one image at arbitrary time and control the stored CCD.

This function is used for long exposures and strobe with frame image output.

Synchronization system: Internal/external HD/VD

Inputting an HD/VD signal from the outside automatically establishes external synchronization. This function is effective for controlling multiple cameras efficiently from the external system.

Setting each mode on rear panel

The setting of each mode can be changed by the DIP switch.

Almost all switches are located on the rear panel. This feature permits easy setting after equipment is installed.

Compact and lightweight

Compared to the existing devices, the size and weight are reduced widely.

Each of the XC-ES30/30CE, XC-ES50/50CE, XC-EI30/30CE, and XC-EI50/50CE can be used in applications using two-piece cameras.

C-mount

Excellent shock and vibration resistance

1