Proceed as follows:
1.Press the MENU/ESC button to enter the menu;
2.Press < or > (fig. 9) until “Cup warmer” is displayed;
3.Press the OK button: “Enable?” or “Disable?” will be displayed
4.Press the OK button to enable or disable the cup warmer (“Cup warmer”“Enabled” on the display indicates the fun- ction is enabled)
5.Press the MENU/ESC button to exit the menu.
Warming the cups keeps the coffee hot.
Setting the language
To modify the language of the display, proceed as follows:
1.Press the MENU/ESC button to enter the menu;
2.Press < 4 times until “Set language” is displayed;
3.Press the OK button;
4.Press < or > until the required language is displayed;
5.Press the OK button to confirm;
6.A message confirming the language installed is displayed;
7.Then press the MENU/ESC button to exit the menu.
Energy saving
Use this function to enable or disable energy saving.
When enabled, the function reduces energy consumption in compliance with European regulations.
To disable (or enable) energy saving, proceed as follows:
1.Press the MENU/ESC button to enter the menu;
2.Press < or > (fig. 9) until “Energy saving” is displayed;
3.Press the OK button. “Disable?” is displayed (or “Enable?” if the function has been disabled);
4.Press the OK button to disable (or enable) energy saving mode;
5.Then press the MENU/ESC button to exit the menu. When the function is active, if the machine is not used for some time, “Energy saving” is displayed.
Please note!
•When in energy saving mode, a few seconds elapse before the first coffee, cappuccino or milk based coffee is delivered as the appliance must heat up again.
•To prepare any drink, press any button to exit energy sa- ving, then press the button corresponding to the drink you want to make.
•If the milk container is inserted, “Energy saving” is not activated.
Setting the temperature
To modify the temperature of the water used to make the coffee, proceed as follows:
1.Press the MENU/ESC button to enter the menu;
2.Press < or > (fig. 9) until “Set temperature” is displayed;
3.Press the OK button;
4.Press < or > until the required temperature (●=low;
●●●●=maximum) is displayed;
5.Press the OK button to confirm;
6.Then press the MENU/ESC button to exit the menu.
Setting water hardness
For instructions on setting water hardness, see page 20.
Beep
This enables or disables the beep emitted by the appliance whe- never a button is pressed or an accessory is inserted/removed. To disable or
1.Press the MENU/ESC button to enter the menu;
2.Press < or > (fig. 9) until “Beep” is displayed;
3.Press the OK button: “Disable?” is displayed (or “Enable?” if disabled);
4.Press the OK button to enable or disable the beep;
5.Press the MENU/ESC button to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back to the default values (with the exception of the language which remains as set).
To reset the default values, proceed as follows:
1.Press the MENU/ESC button to enter the menu;
2.Press < or > (fig. 9) until “Default values” is displayed;
3.Press the OK button;
4.“Confirm?” is displayed;
5.Press the OK button to confirm and exit.
Statistics function
This displays statistics relating to the machine. To display, pro- ceed as follows:
1.Press the MENU/ESC button to enter the menu;
2.Press < or > (fig. 9) until “Statistics” is displayed;
3.Press the OK button;
4.Press < or > (fig. 9) to verify:
-how many coffees have been made;
-the total number of cappuccinos and milk based coffees made;
-the total number of litres of water delivered.
-how many times the machine has been descaled.
-how many times the water softener filter has been
replaced.
5. Press the MENU/ESC button twice to exit the menu.
11
