DeLonghi ESAM6700 manual Making cappuccino, Moving it towards number 1 obtains a less dense froth

Making cappuccino

1.After attaching the milk container, place frothed milk regulator (B1) on lid to position

2 for CAPPUCCINO (fig. 28). The quantity of froth can be adjusted by moving the regulator towards number 2 for a denser froth.

Moving it towards number 1 obtains a less dense froth.

2.Press the CAPPUCCINO icon (fig. 29). The message “Cappuccino... Jug selector in position: 1” appears . After a few seconds, frothed milk flows out of the milk spout into the cup below.

The milk will stop automatically and delivery of coffee will begin.

Information! If during delivery you want to stop preparing milk, press the CAPPUCCINO icon or interrupt preparation of the coffee by pressing

the icon.

Making Italian macchiato

1.After attaching the milk container, place frothed milk regulator (B1) on lid to position

2 for ITALIAN MACCHIATO (fig. 28)

2.Press the italian MACCHIATO icon (fig.

30). The message “Macchiato... Jug selector in position: 2” appears.

After a few seconds, frothed milk flows out of the milk spout into the cup below.

The milk will stop automatically and delivery of coffee will begin.

Information: If during delivery you want to stop preparing milk, press the italian MACCHIATO icon or interrupt preparation of the coffee by

pressing the icon.

Making hot milk

1.After attaching the milk container, position the frothed milk regulator (B1) according to the quantity of froth you require (pos. 1 = little froth; pos. 2 = abundant froth).

2.Press the HOT MILK icon (fig. 31). “HOT

MILK” appears on the display and after a few seconds, frothed milk is delivered from the milk spout into the cup below. Delivery of milk stops automatically.

Information: If during delivery you want to stop preparing milk, press the HOT MILK icon once.

Cleaning the milk container after use

Important! Danger of burns When cleaning the internal tubes of the milk container, a little hot water comes out of the frothed milk tube (B5). Avoid contact with splashes of water.

When “Press CLEAN button” flashes on the display (each time you use a milk function):

1.Leave the jug attached the machine (you do not need to empty it);

2.Place a cup or other recipient under the frothed milk spout.

3.Press the CLEAN button (fig. 32) and keep pressing until the progress bar which appears on the display together with the message “Cleaning...” is complete.

4.Remove the milk container and always clean the nozzle with a sponge (fig. 33).

Information!

•When “Press CLEAN button” flashes on the display, you can still prepare any type of coffee or milk. If you have to make a number of drinks with milk, wait until you have delivered the last cup before cleaning the container.

•The milk left in the jug can be kept in the refrigerator.

Programming the size for each beverage button

The appliance is factory preset to automatically deliver standard quantities.

To change these quantities, proceed as follows:

1.Place a cup under the coffee spouts and milk spout.

2.Press the icon corresponding to the function you want to program (LATTE, CAPPUCCINO, ITALIAN MACCHIATO or HOT MILK) until “Milk for... Program quantity” appears on the display and the icon corresponding to the selected function flashes.

3.Release the icon. The appliance starts delivering milk.

4.When the required quantity of milk has been delivered into the cup, press the icon again.

5.After a few seconds, the appliance starts delivering coffee into the cup and the message “Coffee for... Program quantity” is displayed (with the exception of the HOT MILK function) and theicon flashes.

16