Information!
If the brew group is difficult to insert, you must first adapt it to the right dimension by pressing it forcefully from
the bottom and top as shown in the figure.
7.Once inserted, make sure the two red buttons have snapped out.
8.Replace the drip tray and grounds container.
9.Close the service door.
Cleaning the milk container
Clean the milk container each time you prepare milk as described below:
1.Clean the milk container each time you prepare
| milk as described | |||
| below: |
|
| |
2. | Remove the milk | |||
| spout and intake | |||
| tube. |
|
| |
3. | Remove |
| the | |
| selector |
| by | |
| pulling |
| it | |
| outwards. |
| ||
4. | Wash | all | the | |
| c o m p o n e n t s | |||
| thoroughly | with | ||
| hot | water | and | |
| mild dish soap. | |||
| All | components | ||
| can | be | washed | |
in a dishwasher,
placing them in the top basket of the dishwasher.
Make sure there are no milk residues left inside the holes and the groove on the fine end of the selector.
5.Check that the intake tube and spout are not clogged with milk residues.
6.Replace the selector, milk spout and intake tube.
7.Replace the lid on the milk container, turning it counterclockwise to hook it in place.
DESCALING
Descale the machine when the message “DESCALE!” flashes on the LCD display.
Important! Descaler contains acids which may irritate the skin and eyes. It is vital to adhere to the manufacturer’s safety warnings given on the descaler pack and the warnings relating to the procedure to follow in the event of contact with the skin and eyes.
Information! Use De’Longhi recommended descaler only. Under no circumstances should you use sulphamic or acetic based descalers. Their use invalidates the warranty. Failure to descale the appliance as described above also invalidates the warranty.
1.Turn the machine on.
2.Enter the programming menu by pressing the P icon.
3.Press the 
or 
icon until “Descaling” is displayed.
4.Select by pressing the OK icon.
“Descaling Confirm?” is displayed. Press OK to activate the function.
5.The message “ Add descaler. Confirm?” is displayed.
6.Before confirming, empty the water tank
(A13).
Pour the descaler diluted with water (respecting the proportions indicated on the descaler bottle) into the water tank.
Place an empty container with a minimum capacity of 50 oz (1.5 L) under the hot water spout.
Important! Danger di of burns Hot water containing descaler flows out of the hot water spout. Avoid contact with splashes of water.
7.Confirm by pressing the OK icon.
8.The message “Descaling Underway...” is displayed. The descaling program starts and
the descaler liquid comes out of the water spout.
The descale program automatically performs a series of rinses and pauses to remove limescale deposits from inside the machine.
After about 30 minutes, the message “Rinsing FILL TANK!” is displayed.
19
