Fig.4
Lock
Open
Fig.5
Fig.6
Using the "P" function
The "P" (pulse) function improves control for short periods of processing.
The appliance functions as long as the knob is kept in the "P" position.
Cleaning the appliance
NEVER IMMERSE the motor base in water!
Make sure the appliance is unplugged from the mains socket.
•Remains of the ingredients being processed must be removed with a spatula. In models with a plastic blender jar, use a rubber spatula to avoid scratching the surface.
•Pour lukewarm water into the blender jar, filling to the halfway point. Operate the appliance for a few seconds then empty the jar. Repeat the operation if possible.
•Remove the blender jar, lid and measuring cup and wash in luke- warm water. Rinse and dry thoroughly.
•To facilitate cleaning, in certain models the blade unit can be removed as follows:
1.Remove the jar from the base and turn it upside down.
2.Insert the hooks on the end of the measuring cup into the notches on the bottom of the upturned jar (see fig. 4).
3.Turn the measuring cup clockwise (fig. 5) as far as it will go then pull until the blade unit is released (fig. 6).
4.Wash, dry, then reassemble, taking care to replace the gasket correctly. Position the blade unit on the bottom of the jar, pressing down until it fits in place, then use the measuring cup to rotate the blade unit anticlockwise as far as it will go.
The blender jar and all plastic components must not be washed in the dishwasher or in boiling water.
•Take care when handling the glass jar to avoid violent impact.
•Clean the motor base and power cable with a damp cloth or sponge.
Dry thoroughly with a soft cloth.
•Wrap the power cable carefully around the bottom of the motor base.
Suggestions for use
1 General
•In order to get results and not risk that the ingredients spill out of the blender jar, add the ingredients to the jug a little at a time.
•Do not fill the jar more than full – the movement of the blades will increase the volume of the ingredients in the jug. The recipes which use large quantities of ingredients should be processed in batches.
Blender KF8150
4
