ELECTRICAL CONNECTIONS
Before plugging the unit into the power supply, check the following:
•the power supply voltage must be the same as the voltage shown on the rating plate
•the power socket and the voltage circuit must be suitable for the power requirements of the unit
•the socket must be suitable for the plug; if not, have the socket replaced.
FINAL CHECK
In order to ensure that your
•all doors and windows in the room to be air- conditioned are closed (except for temporary installation, in which case a window must be left partially open).
•Do not place objects of any kind on the air- conditioner.
•Ensure that the air intake and discharge vents are not obstructed.
•Make sure that there are no sources of heat in the room.
Close the windows
•Draw the curtains and/or partially close the blinds to protect the room against direct sunlight. This will increase the efficiency and economy of the
Draw the curtains
Close the door
Lower the blinds
Do not cover
YOUR
9