17 |
Resin filter |
Cover |
18 |
15ON/Standby button
16MODE button (selects the modes)
17Signal receiver
1 | 2 | 6 | 7 | 8 | 5 |
3 |
|
|
|
| 9 |
4 |
|
|
|
| 10 |
12 |
|
|
|
| 11 |
|
|
|
|
| 17 |
16 |
|
|
|
| 13 |
14 |
|
|
|
|
|
|
|
| 15 |
|
|
19 |
DESCRIPTION OF THE CONTROL PA- NEL WITH ADVANCED LCD DISPLAY
1Air conditioning symbol
2Dehumidifying symbol
3Fan symbol
4SMART symbol
5BOOST symbol
6SLEEP symbol
7Alarm symbol
8Temperature indicator
9“No water” symbol
10Timer symbol
11Fan speed indicator
12AUTOFAN indicator
13FAN button
14Increase (+) and decrease (-) temperature buttons
OPERATING FROM THE CONTROL PANEL
The control panel enables you to manage all the main functions of the appliance, however some functions are only available through the use of the remote control.
Turning the appliance on
•Plug into the outlet and check the black cap is fully inserted.
Two lines appear on the display indicating that the appliance is in standby (fig. 20).
• Press the 
button until the appliance co- mes on. The last function active when it was turned off will appear.
•Never turn the air conditioner off by unplug-
ging from the outlet. Always press the 
button, then wait for a few minutes before unplugging. This allows the appliance to per- form a cycle of checks to verify operation.
20
9
