PREPARING FOR USE
The instructions below will enable you to prepare your air conditioner for operation as efficiently as possible.
Before use, make sure the air intake and outlet grilles are unobstructed.
Air-conditioning without installation
Just a few simple steps and your comfort is en- sured with your appliance:
•Fit the air exhaust hose in the housing at the back of the appliance (fig. 1).
12
1
•Fit the window outlet (N) to the end of the hose (K).
•Place the air conditioner near a window or French window.
•Adjust the length of the hose to reach the window.
•Make sure the air exhaust hose is unobstruc- ted.
•Open the window or French window slightly and position the outlet (fig. 2).
2
•If you have a double window, use the sucker
(Q) provided to hold the two parts of the win- dow together (fig. 3).
32
1
•If you have a sash window, place the win- dow bracket (T) on the window sill, extend the window bracket fully within the window frame, fix the window bracket by using the locking pin then lower the window onto the window bracket. Insert the window outlet
(N) of the exhaust hose (K) into the slot, then connect the hose to the air conditioner (fig. 4).
4 
•Thanks to the locking pins, it’s possible to use the window bracket also for sliding win- dows. Position the hole of the window bra- cket so to allow a correct installation of the exhaust hose (see figure 5).
5
5
