Operation
Depending on the model, the temperature on the display is shown in °C or °F. However, the illu- strations in the manual give the values in °F.
TURNING THE APPLIANCE ON
Plug the appliance into the socket. Two lines appear on the display indicating that the appliance is in standby. You can con- trol the appliance with the remote control (see page 11) or with the control panel.
OPERATION WITH CONTROL PANEL
Press the ON/STAND BY button (A). When turned on, the air conditio- ning unit starts operating in the same mode as when it was turned off. Press the MODE button (B) until the indicator light corresponding to the required mode lights up:
Indicator light (C): | |
Indicator light (D): | dehumidifying mode |
Indicator light (E) : | fan mode with air filtration |
Indicator light | |
After selection, the flaps open at a preset angle. | |
When the air conditioner is turned off, the flaps will close. | |
AIR-CONDITIONING MODE
Ideal for hot humid weather when you need to cool and dehu- | 78 |
midify the room. | |
To set the operation of the appliance correctly, press the “+“ (G) | |
or |
|
Then select the fan speed by pressing the SPEED button (U) until the |
|
indicator light corresponding to the required fan speed lights up. |
|
MAX: the air conditioning unit operates at maximum to reach |
|
the required temperature as rapidly as possible |
|
MED: reduces noise levels but still maintains a good level of |
|
comfort |
|
MIN: for silent operation |
|
AUTO: the appliance automatically selects the most suitable |
|
fan speed in relation to the temperature set on the digi- |
|
tal display |
|
The most suitable temperature for the room during the summer |
|
varies from 75° - 81° F (24 to 27°C). |
|
You are recommended, however, not to set a temperature |
|
excessively lower than the outside temperature. |
|
DEHUMIDIFYING ???? | 50 |
Ideal for reducing humidity in spring and autumn, during rainy spells | |
or in damp rooms. Place the appliance in the room without fitting |
the air exhaust hose (12) and the intake hose (19). After selecting dehumidifying mode, the light (D) comes on. Press the “+“ (G) or “-
“(P) buttons until the required humidity level is displayed. At the same time, the Auto fan light (Q) comes on as the appliance auto- matically selects the most appropriate speed. Water is removed from the air and collected in the condensation tank (8) at the back of the air conditioner.
8
