Basic Operations
CD/MP3, AM/FM, CLOCK MODULE
Playing Audio CD or MP3 Files
The Delphi CD Audio System can play CDs,
To play compact discs:
1.Rotate the central unit so that the CD panel faces forward. Be sure to follow the arrows when rotating the unit. Complete the rotation until the unit locks in position. CAUTION: Do not use excessive force, which could damage the unit.
2.Press “Power” on the CD panel or remote control.
3.Holding the central unit steady, open the compartment lid and insert a compact disc in the CD player.
4.Close the CD compartment lid.
| Before playing a compact disc, your Delphi CD | ||||
| Audio System reads all file and directory informa- | ||||
| tion on the CD. Depending on file structure, this may | ||||
| take more than one minute. “READING” is displayed | ||||
| during this time. The first track on the CD will begin | ||||
SECT | to play automatically. At the same time, information | ||||
about the disc will display. | |||||
ION3 | |||||
CD |
|
| |||
| 15 TRK |
| Total track numbers | ||
|
| ||||
| 72:46 |
|
| Total playback time | |
|
|
| |||
Figure 6: Initial CD Display
MP3 | Total directory numbers | ||
22 DIR |
|
| |
|
| ||
185 TRK |
| Total track numbers | |
| |||
Figure 7: Initial MP3 Display
**Recording MP3 files for the Delphi CD Audio System may require the use of “Full Version”
Proper Care and Storage of Compact Discs
Scratches, dirt, and fingerprints on the surface of compact discs may cause tracking errors. For opti- mum sound quality:
•Compact discs should be cleaned before playing; using a dry, soft cloth, wipe from the center out, never in a circular motion
•Do not clean compact discs with benzene or other solvents, commercially available cleaners, or antistatic spray intended for vinyl LPs
•Store CDs in their cases when not playing
•Do not allow CDs to be exposed to direct sun- light or heat sources
•Do not tape paper or apply stickers to CDs
CD/MP3 Programming Options
Your Delphi CD Audio System lets you program the playing order of up to 30 CD/MP3 tracks or MP3 directories.
CD Program Play
To program the playing order of tracks on a CD:
1.In CD/MP3 mode, stop playback.
2.Press “Memory” on the CD panel or “mem/prog” on the remote. “P01_ _” will flash on the LCD.
3.Press “Next” or “Prev” on the CD panel or the category keys or numeric keys on the remote to select a track number.
4.Press “Memory” or “mem/prog” to confirm.
5.“P02_ _” will flash. Continue Steps 3 and 4 until all tracks have been selected (up to a maximum of 30).
6.Press “Play” on the CD panel or the enter key on the remote to play.
CD
Track number
Program number
Figure 8: Display During CD Programming
MP3 Program Play
To program the playing order of tracks or directories on an MP3:
1.In CD/MP3 mode, stop playback.
2.Press “Memory” on the CD panel or “mem/prog” on the remote. “P01_ _
3.Press “Next” or “Prev” on the CD panel or the category keys or numeric keys on the remote to select a directory.
4
