Motorola 031431a Problem Solution Plugged, Data cable into, My handset but, My handset did, Rate

Problem	Solution
I plugged the	The beep indicates that you are set
data cable into	up correctly. If you did not hear a
my handset but	beep, make sure that both ends of
my handset did	the data cable are connected—the
not beep. How	smaller end to your handset and the
do I know if the	larger end to your computer.
data cable is	Finally, your computer may have
ready to go?
	deactivated the port to save power.
	Try opening an application that uses
	the port, like a dial-up application,
	and your computer will automatically
	activate the port.
My handset	Some wireless networks may not
beeped when I	support data transmission. If you are
attached the	roaming on an unfamiliar network,
data cable, but	this may be the case.
my data	Also, remember that data
applications
	transmission usually requires a
don’t work.
	subscription. Call 3 for more
	information.
When sending	19200 Kbps is the data transfer rate
data with the	of the connection between your
data cable, why	computer and the handset in a
does the	standard CSD (Circuit Switch Data)
computer show	connection. The rate of the
a connection	connection between your handset
rate of 19200	and the network is displayed on your
Kbps?	handset, and will be either 14400 or
	9600 Kbps.
	A GPRS connection may have a
	higher data transfer rate.

160 - Troubleshooting