PRODUCT SPECIFICATIONS

Cuts Per Minute

18,800

 

 

Feed Rate

28ft./min.

 

 

Max. Cut Depth (per pass)

3/32”

 

 

Max. Cutting Width

12- ½ “

 

 

Max. Cutting Height

6”

 

 

Cutterhead Speed

9,400 RPM

 

 

Tool Dimensions (LxWxH)

21-5/8” x 23-5/8” x 20-1/8”

 

 

Motor

15 Amp, 120V

 

 

Net Weight

58 lbs

 

 

Knife Type

Double-edge reversible

Number of Knives

2

 

 

Knife Size (L x W x T)

320mm x12mm x1.5mm

 

 

UNPACKING

Compare all parts to the list below and check that all parts are present and in good condition. Report any missing or damaged parts to your distributor or dealer. Prior to tool assembly and use, read this manual thoroughly to familiarize yourself with proper assembly, maintenance and safety procedures.

DESCRIPTION (QUANTITY)

1.

DELTA® Model #22-555 Planer (1)

1

2

2.

Height Adjustment Handle (1)

3.

Reversible 2” Dust Port (1)

4.

Knife Transfer Tool (2)

 

 

5.

T-wrench (not shown)

 

 

HARDWARE PACKAGE

4mm T-handle Hex Wrench

M5x16mm Hex Head Screw (1)

M5 Flat Washer

M6x15mm Lock Knob (2)

3

4

Remove any protective materials and coatings from all of the parts and the tool. The protective coatings can be removed by spraying WD-40 on them and wiping it off with a soft cloth. This may need redone several times before all of the protective coatings are removed completely.

If any parts are missing, do not attempt to plug in the power cord and turn “ON” the machine. The machine should only be turned “ON” after all the parts have been obtained and installed correctly.

8

Page 8
Image 8
Delta 22-555 instruction manual Product Specifications, Unpacking, Description Quantity, Hardware Package