Specifications | Exmark Mhp3615kac, Mhp4815kac

2.SPECIFICATIONS

2.1MODEL NUMBER: MHP3615KAC; MHP4815KAC

2.2ENGINE

2.2.1Engine Specifications: See your Engine Owner's Manual.

2.2.23600 RPM (No Load).

2.3FUEL SYSTEM

2.3.1Capacity: 5.0 gal. (18.9 L.)

2.3.2Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries using the research method, it should be a 90 octane minimum.

2.3.3Fuel Filter: Replaceable in-line

2.3.4Fuel Shut-Off Valve: 1/4 turn

2.4SAFETY INTERLOCK SYSTEM

Operator must have transmission in neutral and PTO disengaged to start engine. Release of OPC levers will cause the engine to stop if transmission is not in neutral and/or PTO is engaged.

2.5 STEERING/BRAKE CONTROL:

Fingertip drive control levers provide independent speed control, braking, and neutral to each drive wheel for moving, stopping, and power turning. Parking brakes are engaged by locking drive control levers in the “brake” position.

2.6 TRANSMISSION:

2.6.1Peerless 700-070A, five speeds forward and one reverse.

2.6.2 Speed Range: 1st	2.0 mph (3.22 km/h)	4th	4.1 mph (6.60 km/h)
2nd	2.7 mph (4.35 km/h)	5th	6.2 mph (9.98 km/h)
3rd	3.5 mph (5.63 km/h)	Rev. 3.1 mph (4.99 km/h)

2.7 WHEEL DRIVE SYSTEM:

Banded double A-Section V-Belts, single topside idlers, and replaceable bolt-on drive sheaves and brake drums.

2.8 TIRES:		Drive
		Pneumatic (Air-Filled)
	Size	16 x 6.50-8
	Quantity	2
	Tread	Turf Master
	Ply Rating	4
	Pressure	14 psi (97 kPa)

Front Caster

Semi-Pneumatic

9 x 3.50-4

Smooth

2.9 DECK

2.9.1	Cutting Width:	Model 36 in	35.25 in. (89.5 cm)
		Model 48 in	47.25 in. (120.0 cm)
2.9.2	Discharge: Right Side
2.9.3	Blade Size:	Model 36 in	18.00 in. (45.7 cm)....	Qty. 2
		Model 48 in	16.25 in. (41.3 cm)....	Qty. 3

2.9.4Type of Drive: Manual engagement of belt with over-center lock. Belt tension is adjustable via turnbuckle.

2.9.5Deck Mounting: Full floating deck is attached to out-front support frame, removable for service.

2.9.6Cutting Height: Adjusts in 1/2” (1.3 cm) increments from 1.5” (3.8 cm) to 4 1/2” (11.4 cm).

-9 -

Exmark Mhp3615kac, Mhp4815kac manual Specifications

Models: Mhp3615kac, Mhp4815kac