![](/images/new-backgrounds/1176363/17636329x1.webp)
2.10 DIMENSIONS
2.10.1 | Overall Width: |
| 36” | 48” | ||
|
| Discharge chute down | 46.25” (117.5 cm) | 58.25” (148.0 cm) | ||
|
| Discharge chute up (Transport only) | 36.1” (91.7 cm) | 48.1” (122.2 cm) | ||
2.10.2 |
| Overall Length: |
| 48” |
| |
| 36” |
| ||||
|
|
|
| 77.0” (196 cm) | 73.0” (185 cm) |
|
2.10.3 |
| Curb Weight: |
|
| 48” |
|
|
| 36” |
| |||
|
|
|
| 517 lbs. (234 kg) | 565 lbs. (256 kg) |
|
∗Weights will vary slightly depending on engine option.
2.10.4Overall Height:
2.10.5Tread Width (to outside of tires):
| 36” | 48” |
| 44.1” (112 cm) | 44.1” (112 cm) |
| 36” |
|
| 48” | |
| 35.2” (89.4 cm) | 35.2” (89.4 cm) |
2.11 TORQUE REQUIREMENTS
BOLT LOCATION | TORQUE |
|
Blade Mounting Bolt | ||
Cutter Housing Spindle Nut | ||
Mower Deck Support/Engine Deck Mount | ||
Engine Mounting Bolts (15 HP Kawasaki) | ||
Transmission | ||
Wheel Lug Nuts |
3.ASSEMBLY INSTRUCTIONS
3.1Uncrate unit, and remove upper handle assembly, fuel tank, and linkages from top of crate.
3.2Remove and open the bolt bag.
3.3Loosen the 5/16" hardware at the two (2) discharge deflector hinge points so that the deflector is snug, but can be moved up and down freely.
3.4Refer to Parts Manual to help you identify and locate parts and their proper position.
3.5Apply retaining adhesive
3.6Attach the fuel tank hose to the tank fitting and secure with the clamp provided.
3.7Position the lower end of the handle assembly on the outside of the upper rear section of the fuel tank and handle support. Install four
-10 -