OPERATING CONTROLS AND ADJUSTMENTS

STARTING AND

STOPPING SAW

The switch (A) Fig. 17, is located on the front side of the band saw. To turn the saw “ON” move the switch (A) to the up position.To turn the saw “OFF” move the switch

(A) to the down position.

LOCKING SWITCH

IN THE “OFF” POSITION

IMPORTANT: When the machine is not in use, the switch should be locked in the “OFF” position to prevent unauthorized use. This can be done by grasping the switch toggle (B) Fig. 18, and pulling it out of the switch, as shown. With the switch toggle (B) removed, the switch will not operate. However, should the switch toggle be removed while the machine is running, the switch can be turned “OFF” once, but cannot be restarted without inserting the switch toggle (B).

ADJUSTING

BLADE TENSION

1.With the saw blade centered on the two band saw wheels, turn the tension adjustment knob (A) Fig. 19, clockwise to increase blade tension or counterclockwise to decrease blade tension.

2.Blade tension can be checked by pushing on the blade midway between the two band saw wheels. The blade should move slightly with average finger pressure. NOTE: Do not over tension the blade. Too much tension may cause blade breakage. Too little tension may cause the blade to slip on the wheels.

3.A series of graduation numbers (1 though 5) shown at (B) Fig. 19, can be used as reference points in determining proper blade tension for different width blades. These graduations will be accurate for average work and are not affected by re-brazing of the saw blade. You should use these graduations until you have become familiar enough with the operation of the band saw to vary the tension for different kinds of blades or work. Over tensioning is a common cause of blade breakage and unsatisfactory blade performance.

4.When the band saw is not in use, it is good practice to release tension to prolong the life of the blade and to prevent the blade from taking a set in the band saw wheels.

5.NOTE: Wider blades need more tension than narrow blades.

A

Fig. 17

B

Fig. 18

A

B

Fig. 19

11

Page 10 Page 12
Page 11
Image 11
Delta 28-195 instruction manual Operating Controls and Adjustments, Starting Stopping SAW, Locking Switch OFF Position
Page 10 Page 12

28-195 specifications

The Delta 28-195 is a renowned table saw that has garnered a reputation among woodworkers for its precision, reliability, and ease of use. This powerful tool is designed to handle a variety of cutting tasks, making it a versatile addition to any workshop.

One of the main features of the Delta 28-195 is its robust 1.75 HP motor, which delivers ample power for cutting through dense materials with ease. This performance is critical for both professional woodworkers and hobbyists who demand high-quality results. The saw operates on 120V power, allowing for convenient plug-and-play usage in most home workshops or job sites.

The Delta 28-195 boasts an impressive blade capacity of 10 inches, enabling users to make clean, precise cuts across a wide range of wood types and thicknesses. The table itself is generously sized, providing ample workspace for large projects and facilitating straightforward material handling. The table is also constructed from durable cast iron, ensuring stability while reducing vibrations during operation, which contributes to enhanced accuracy.

Another highlight of the Delta 28-195 is its advanced fence system. The fence is easy to adjust and locks securely in position, allowing for quick and accurate measurements for ripping tasks. The presence of a large and easy-to-read scale enhances operational efficiency, making it simple for woodworkers to set the desired dimensions before making their cuts.

Delta has also incorporated several safety features into the 28-195 model. The blade guard protects users from accidental contact with the spinning blade, while the riving knife helps prevent kickback, an essential aspect of safe table saw operation. Furthermore, the saw includes push sticks and other accessories to aid in maintaining safe distances from the blade during operations.

Dust collection is another critical area where the Delta 28-195 excels. Equipped with a 2.5-inch dust port, the saw connects easily to a dust collection system, helping to keep the workspace clean and reducing airborne particles, which can be harmful to health.

In conclusion, the Delta 28-195 table saw combines robust performance, advanced features, and enhanced safety, making it an excellent choice for both amateur and professional woodworkers. Its blend of technology, durability, and efficiency ensures that users can achieve precise cuts time and time again, making it a worthy investment for those serious about their craft.
Top Page Image Contents