WRENCH STORAGE
The hex wrench (A) supplied with your band saw can be stored inside the wheel cover, as shown in Fig. 39.
DUST CHUTE
A dust chute (A) Fig. 40, is provided which enables you to connect your band saw to a standard shop vacuum or dust collector. The opening of the dust chute is
MITER GAGE
A miter gage (A) Fig. 41, is supplied with your band saw. The miter gage body (C) can be adjusted up to 45 de- grees right and left by loosening lock knob (B), rotating miter gage body (C) to the desired angle, and tightening lock knob (B).
A useful operation when using the miter gage to cut wide workpieces is to rotate the miter gage 180 degrees. This provides more support for the workpiece on the table, as shown in Fig. 42.
A 
Fig. 39
A
Fig. 40
A
C
B
Fig. 41
Fig. 42
18
