ADJUSTING UPPER BLADE GUIDE ASSEMBLY

The upper blade guide assembly (A) Fig. 31, should always be set about 1/8 above or as close as possible to the top surface of the workpiece being cut. Loosen lock knob (B) and rotate adjusting knob (C) to position the guide assembly (A) at the desired height. Then tighten lock knob (B).

CHANGING BLADES

To change blades, proceed as follows:

1.DISCONNECT MACHINE FROM POWER SOURCE.

2.Pull handles (A) Fig. 32, and open upper and lower wheel guards (B) as shown in Fig. 33.

3.Remove two screws (C) Fig. 34, and remove blade guard (D).

4.Release tension on the band saw blade by turning tension knob counterclockwise.

5.Remove table alignment screw (A) Fig. 11 and table insert.

6.Slip the blade off both wheels and guide it out through the slot in the table.

7.Check new blade to be sure teeth will point down towards table when installed. IF NOT, TURN BLADE INSIDE OUT.

8.Place new blade on wheels and adjust tension, guides and tracking as previously described.

9.Replace blade guard that was removed in STEP 3.

10.Close upper and lower wheel guards (B) Fig. 33, before operating.

11.Replace table insert and alignment screw (A) Fig. 11, that was removed in STEP 5.

CB

A

Fig. 31

A

A

Fig. 32

B

Fig. 33

D

C

Fig. 34

16

Page 15 Page 17
Page 16
Image 16
Delta 28-195 instruction manual Changing Blades, Adjusting Upper Blade Guide Assembly
Page 15 Page 17

28-195 specifications

The Delta 28-195 is a renowned table saw that has garnered a reputation among woodworkers for its precision, reliability, and ease of use. This powerful tool is designed to handle a variety of cutting tasks, making it a versatile addition to any workshop.

One of the main features of the Delta 28-195 is its robust 1.75 HP motor, which delivers ample power for cutting through dense materials with ease. This performance is critical for both professional woodworkers and hobbyists who demand high-quality results. The saw operates on 120V power, allowing for convenient plug-and-play usage in most home workshops or job sites.

The Delta 28-195 boasts an impressive blade capacity of 10 inches, enabling users to make clean, precise cuts across a wide range of wood types and thicknesses. The table itself is generously sized, providing ample workspace for large projects and facilitating straightforward material handling. The table is also constructed from durable cast iron, ensuring stability while reducing vibrations during operation, which contributes to enhanced accuracy.

Another highlight of the Delta 28-195 is its advanced fence system. The fence is easy to adjust and locks securely in position, allowing for quick and accurate measurements for ripping tasks. The presence of a large and easy-to-read scale enhances operational efficiency, making it simple for woodworkers to set the desired dimensions before making their cuts.

Delta has also incorporated several safety features into the 28-195 model. The blade guard protects users from accidental contact with the spinning blade, while the riving knife helps prevent kickback, an essential aspect of safe table saw operation. Furthermore, the saw includes push sticks and other accessories to aid in maintaining safe distances from the blade during operations.

Dust collection is another critical area where the Delta 28-195 excels. Equipped with a 2.5-inch dust port, the saw connects easily to a dust collection system, helping to keep the workspace clean and reducing airborne particles, which can be harmful to health.

In conclusion, the Delta 28-195 table saw combines robust performance, advanced features, and enhanced safety, making it an excellent choice for both amateur and professional woodworkers. Its blend of technology, durability, and efficiency ensures that users can achieve precise cuts time and time again, making it a worthy investment for those serious about their craft.
Top Page Image Contents