POWER CONNECTIONS

A separate electrical circuit should be used for your machines. This circuit should not be less than #12 wire and should be protected with a 20 Amp time lag fuse. If an extension cord is used, use only 3-wire extension cords which have 3- prong grounding type plugs and matching receptacle which will accept the machine’s plug. Before connecting the motor to the power line, make sure the switch is in the “OFF” position and be sure that the electric current is of the same characteristics as indicated on the machine. All line connections should make good contact. Running on low voltage will damage the motor.

WARNING: DO NOT EXPOSE THE MACHINE TO RAIN OR OPERATE THE MACHINE IN DAMP LOCATIONS.

MOTOR SPECIFICATIONS

Your machine is wired for 120 volt, 60 HZ alternating current. Before connecting the machine to the power source, make sure the switch is in the “OFF” position.

GROUNDING INSTRUCTIONS

WARNING: THIS MACHINE MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRIC SHOCK.

1. All grounded, cord-connected machines:

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with an electric cord having an equipment- grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment- grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood,

or if in doubt as to whether the machine is properly grounded.

Use only 3-wire extension cords that have 3-prong grounding type plugs and matching 3-conductor receptacles that accept the machine’s plug, as shown in Fig. A.

Repair or replace damaged or worn cord immediately.

GROUNDED OUTLET BOX

CURRENT

CARRYING

PRONGS

2.Grounded, cord-connected machines intended for use on a supply circuit having a nominal rating less than 150 volts:

If the machine is intended for use on a circuit that has an outlet that looks like the one illustrated in Fig. A, the machine will have a grounding plug that looks like the plug illustrated in Fig. A. A temporary adapter, which looks like the adapter illustrated in Fig. B, may be used to connect this plug to a matching 2-conductor receptacle as shown in Fig. B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green-colored rigid ear, lug, and the like, extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. Whenever the adapter is used, it must be held in place with a metal screw.

NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electric Code.

WARNING: IN ALL CASES, MAKE CERTAIN THE RECEPTACLE IN QUESTION IS PROPERLY GROUNDED. IF YOU ARE NOT SURE HAVE A QUALIFIED ELECTRICIAN CHECK THE RECEPTACLE.

GROUNDED OUTLET BOX

GROUNDING

MEANS

ADAPTER

GROUNDING BLADE

IS LONGEST OF THE 3 BLADES

Fig. A

Fig. B

4

Page 3 Page 5
Page 4
Image 4
Delta 28-195 instruction manual Power Connections, Motor Specifications, Grounding Instructions
Page 3 Page 5

28-195 specifications

The Delta 28-195 is a renowned table saw that has garnered a reputation among woodworkers for its precision, reliability, and ease of use. This powerful tool is designed to handle a variety of cutting tasks, making it a versatile addition to any workshop.

One of the main features of the Delta 28-195 is its robust 1.75 HP motor, which delivers ample power for cutting through dense materials with ease. This performance is critical for both professional woodworkers and hobbyists who demand high-quality results. The saw operates on 120V power, allowing for convenient plug-and-play usage in most home workshops or job sites.

The Delta 28-195 boasts an impressive blade capacity of 10 inches, enabling users to make clean, precise cuts across a wide range of wood types and thicknesses. The table itself is generously sized, providing ample workspace for large projects and facilitating straightforward material handling. The table is also constructed from durable cast iron, ensuring stability while reducing vibrations during operation, which contributes to enhanced accuracy.

Another highlight of the Delta 28-195 is its advanced fence system. The fence is easy to adjust and locks securely in position, allowing for quick and accurate measurements for ripping tasks. The presence of a large and easy-to-read scale enhances operational efficiency, making it simple for woodworkers to set the desired dimensions before making their cuts.

Delta has also incorporated several safety features into the 28-195 model. The blade guard protects users from accidental contact with the spinning blade, while the riving knife helps prevent kickback, an essential aspect of safe table saw operation. Furthermore, the saw includes push sticks and other accessories to aid in maintaining safe distances from the blade during operations.

Dust collection is another critical area where the Delta 28-195 excels. Equipped with a 2.5-inch dust port, the saw connects easily to a dust collection system, helping to keep the workspace clean and reducing airborne particles, which can be harmful to health.

In conclusion, the Delta 28-195 table saw combines robust performance, advanced features, and enhanced safety, making it an excellent choice for both amateur and professional woodworkers. Its blend of technology, durability, and efficiency ensures that users can achieve precise cuts time and time again, making it a worthy investment for those serious about their craft.
Top Page Image Contents