Manuals / Delta / Power Tools / Sander

Delta 31-390, 31-392 instruction manual Adjusting Belt Tracking, Adjusting Pulley Alignment

Models: 31-392 31-390

1 16
Download 16 pages 39.15 Kb
Page 12
Image 12

ADJUSTING BELT TRACKING

To check and adjust the tracking of the sanding belt on the pulleys, proceed as follows:

1.Raise the dust chutes (A) Fig. 34, at both ends of the top guard and dust chute assembly.

2.Make certain the top guard and dust chute assembly is not interfering with the rotation of the sanding belt.

3.Apply power to the machine. Jog the on/off switch several times and check to see if the sanding belt (B) Fig. 34, is tracking correctly on the pulleys, one of which is shown at (C). If an adjustment is necessary, turn the tracking knob (D) slightly right or left as needed until the belt is tracking properly. NOTE: The belt tracking adjustment can be made with the machine running however, make certain the surface of the sanding belt is freely moving and not in contact with any material or part of the machine.

ADJUSTING PULLEY ALIGNMENT

The idler pulley and motor pulley have been aligned and test run at the factory. However, rough handling during shipment or drive pulley wear may cause the sanding belt to run high or low at either the motor or idler end of the machine. The top edge of the sanding belt (A) Fig. 35, must be parallel to the top of the straight platen (B). If it is not parallel, adjust as follows:

1.CAUTION: DISCONNECT TOOL FROM POWER SOURCE.

2.NOTE: If the sanding belt (A) Fig. 35, is running LOW on the motor pulley, this means the top of the motor is too far away from the machine. The top of the motor must be moved toward the machine by loosening the two top INSIDE nuts, one of which is shown at (C), 1/2 turn and then tighten the two top outside nuts (D).

3.NOTE: If the sanding belt (A) Fig. 35, is running HIGH on the motor pulley, this means the top of the motor is too close to the machine. The top of the motor must be moved away from the machine by loosening the two top OUTSIDE nuts, one of which is shown at (D), 1/2 turn and then tighten the two top inside nuts (C).

4.Apply power to the machine. Jog the on/off switch several times and check to see if the top edge of the sanding belt (A) Fig. 35, is running parallel to the top of the straight platen (B). If further adjustment is necessary, repeat the procedure.

CAUTION: DO NOT BEND THE MOTOR MOUNTING PLATE (E) FIG. 35, WHEN MAKING THESE ADJUST- MENTS. If the motor misalignment is excessive, it may become necessary to move the bottom of the motor by adjusting the lower motor mounting nuts (F), in or out, in the same manner.

A

C

B

D

Fig. 34

B

A

C

D

E

F

Fig. 35

12

Page 11 Page 13
Page 12
Image 12
Delta 31-390, 31-392 instruction manual Adjusting Belt Tracking, Adjusting Pulley Alignment
Page 11 Page 13

31-392, 31-390 specifications

Delta 31-390 and 31-392 are advanced aircraft models that stand out in the aviation industry for their unique features and cutting-edge technologies. Designed with a focus on efficiency, safety, and comfort, these aircraft are ideal for a variety of aviation applications, including commercial transport, cargo delivery, and specialized missions.

One of the main features of Delta 31-390 and 31-392 is their aerodynamic design, which significantly enhances fuel efficiency. The sleek fuselage, combined with advanced wing configurations, reduces drag while improving lift. This results in lower fuel consumption, making these aircraft environmentally friendly while also reducing operating costs for airlines and operators.

The powerplants on these models are among the most advanced in the aviation sector. Equipped with high-performance turbofan engines, the Delta 31-390 and 31-392 deliver impressive thrust capabilities while maintaining lower noise levels during flight. The engines incorporate the latest noise reduction technologies, ensuring compliance with stringent noise regulations, making them suitable for operations in noise-sensitive areas.

Safety features are paramount in the design of the Delta 31-390 and 31-392. The aircraft are fitted with state-of-the-art avionics systems that provide pilots with real-time data and advanced navigation capabilities. The inclusion of fly-by-wire technology enhances control and stability during various flight conditions. Additionally, the aircraft's multi-layered safety systems, including redundant systems for critical functions, ensure a high level of operational safety and reliability.

Comfort is another significant aspect of these aircraft. The interior of the Delta 31-390 and 31-392 boasts spacious cabins designed with passenger comfort in mind. Ample legroom, ergonomic seating, and modern amenities contribute to an enjoyable flying experience. The incorporation of advanced climate control systems further enhances passenger comfort by maintaining optimal cabin conditions throughout the flight.

Both models are also equipped with advanced communication systems, ensuring that pilots can stay connected with air traffic control and ground support at all times. The aircraft's ability to integrate with emerging technologies, such as satellite communications, positions them for future advancements in aviation infrastructure.

In summary, Delta 31-390 and 31-392 are exemplary aircraft that combine efficiency, safety, and comfort. Their innovative technologies, including advanced aerodynamics, powerful turbofan engines, and sophisticated avionics, make them stand out in the competitive aviation market. As the industry continues to evolve, these models are well poise to meet the demands of modern aviation.