EXTENSION CORDS

Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension cord which has a 3-prong grounding type plug and matching receptacle which will accept the machine’s plug. When using an extension cord, be sure to use one heavy enough to carry the current of the machine. An undersized cord will cause a drop in line voltage, resulting in loss of power and overheating. Fig. D, shows the correct gauge to use depending on the cord length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

MINIMUM GAUGE EXTENSION CORD

RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES

Ampere

 

Total Length

Gauge of

Rating

Volts

of Cord in Feet

Extension Cord

 

 

 

 

0-6

120

up to 25

18 AWG

0-6

120

25-50

16 AWG

0-6

120

50-100

16 AWG

0-6

120

100-150

14 AWG

6-10

120

up to 25

18 AWG

6-10

120

25-50

16 AWG

6-10

120

50-100

14 AWG

6-10

120

100-150

12 AWG

 

 

 

 

10-12

120

up to 25

16 AWG

10-12

120

25-50

16 AWG

10-12

120

50-100

14 AWG

10-12

120

100-150

12 AWG

12-16

120

up to 25

14 AWG

12-16

120

25-50

12 AWG

12-16

120

GREATER THAN 50 FEET NOT RECOMMENDED

 

 

 

 

Fig. D

FUNCTIONAL DESCRIPTION

FOREWORD

Delta Model 36-585 is a 10" Dual Bevel Compound Miter Saw designed to cut wood, plastic, and aluminum. Bevel and miter angle cutting is easy and accurate. It can crosscut up to 5-5/8" x 2-9/16"at the 90° position, miter at 45°, both left and right 4-1/8" x 2-3/8", bevel at 45° left 5-7/8" x 1-9/16", bevel at 45° right 5-1/2" x 3/4", and compound 45° x 45° 4-2/16" x 3/4". It has positive miter stops at 0°, 22.5°, 31.62°, and 45° degrees both left and right, and adjustable bevel stops at 0° and 45° left and right.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container. Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

NOTICE: The manual cover photo illustrates the current production model. All other illustrations are representative only and may not depict the actual color, labeling, or accessories and are intended to illustrate technique only.

6

Page 6
Image 6
Delta 36-585 instruction manual Unpacking and Cleaning, Foreword