5.Fasten the front table support (F) Fig. 9, to the bottom of the table as shown using two #8x7/8" long wood screws (H) and (I) supplied.

NOTE: The vertical flange, on the table board support (F), should be flush with the front edge of the table board.

NOTE: The slots closer to the angles in the support (F) should be against the table.

NOTE: Screws (H) and (I) Fig. 9 should not be completely tightened to the table board at this time. Screw (I) will have to be removed later.

NOTE: Make certain the end of the table support does not extend out past the table.

CAUTION: DO NOT OVER-TIGHTEN MOUNTING SCREWS. Over-tightening screws in particle board may cause them to strip.

FOR UNISAWS ONLY

6.Fasten the rear table support (A) Fig. 10, to the saw table. Insert a 3/8-24x5/8" hex head screw (B), through hole in rear support and thread screw into tapped hole in table. Repeat this process for the remaining hole. Tighten screws securely. NOTE: FLAT EDGE (D) Fig. 10 AND FIG. 10A, OF

REAR TABLE SUPPORT WILL FACE UPWARD.

FOR 10" CONTRACTORS SAWS ONLY

6.Fasten the rear table support (A) Fig. 10, to the saw table. Insert a 3/8-16x1" hex head screw (B), through hole in rear support and table, place a 3/8 washer onto the screw and thread a 3/8-16 hex nut onto screw and tighten securely. Repeat this process for the remaining hole. NOTE:

FLAT EDGE (D) Fig. 10 AND FIG. 10A, OF REAR TABLE SUPPORT WILL FACE UPWARD.

7.If your saw is equipped with a cast iron wing as shown at (I) Fig. 10. which has a smooth surface, hole (C) Fig. 10 is not used, proceed to step 8. If your saw has a sheet metal wing as shown at (W) Fig. 10A, with a ribbed surface, the rear table support will be fastened through hole (C) Fig. 10A as follows. Insert a 3/8-16x1" hex head screw through hole

(C) and the sheet metal extension wing, place a 3/8" washer on the screw, thread a 3/8-16 hex nut on screw, and tighten securely.

FOR ALL TABLE SAWS

8.Assemble the three brackets (J) to the table adapter plate (K) using the three 1/4-20x3/4" carriage bolts, nuts and washers, as shown in Fig. 11. NOTE: The long leg of the brackets (J) should be against the adapter plate (K) as shown. Do not completely tighten brackets (J) to adapter plate (K) at this time.

H

F

I

Fig. 9

DI

BA C B

Fig. 10

D

W

A B

B

C

Fig. 10A

J

K

Fig. 11

5

Page 4 Page 6
Page 5
Image 5
Delta 36-902 instruction manual Ba C B
Page 4 Page 6

36-902 specifications

The Delta 36-902 is a powerful and versatile table saw designed for both professional woodworkers and serious DIY enthusiasts. Known for its exceptional precision and robust build quality, this saw has become a staple in workshops around the globe. This article will explore the main features, technologies, and characteristics of the Delta 36-902, highlighting its efficiency and functionality.

One of the standout features of the Delta 36-902 is its 15-amp motor, which delivers impressive power for cutting through a wide range of materials, including hardwoods and engineered wood. The motor provides up to 4,800 RPM, allowing for smooth and clean cuts. This is complemented by a heavy-duty cast iron table that measures 27 x 40 inches, providing substantial workspace for larger projects and ensuring stability during use.

The Delta 36-902 features a patented Unifence system that allows for easy adjustments and precise measurements. The fence can be easily moved, locked, and adjusted, providing unmatched accuracy for rip cuts. Additionally, it features an extensive cutting capacity, allowing for a maximum rip width of 30 inches, making it suitable for larger panels.

Another innovative technology integrated into the Delta 36-902 is its blade raising and lowering mechanism. This easy-to-operate crank allows for quick height adjustments, ensuring users can switch between various cutting depths efficiently. The saw also incorporates a high-quality blade guard system that enhances user safety, minimizing exposure to the blade while maximizing visibility.

The Delta 36-902 is built with user convenience in mind. It includes onboard storage for accessories, such as blades and wrenches, ensuring everything is organized and within easy reach. Additionally, its portability features, including a sturdy wheeled stand, make it easy to move the saw in and out of the workshop, providing versatility for different working environments.

Overall, the Delta 36-902 table saw combines robust construction, advanced technology, and user-friendly design, making it a preferred choice for woodworkers who prioritize precision and efficiency. With its powerful motor, extensive cutting capacity, and safety features, it is well-suited for a variety of woodworking tasks, from intricate joinery to large-scale panel cuts. Whether for professional use or home projects, the Delta 36-902 proves to be a reliable and effective tool.
Top Page Image Contents