6.Slide the guide rail along until the “0” on the Unifence scale is aligned with the right edge of the saw table. Snug the hex nuts on the saw and extension table but do not tighten at this time.

7.Adjust the guide rail (C) Fig. 25, parallel with the saw table surface. Place a square (H) on the saw table at both the left and right front ends of the table, with the rule of the square against the flat surface on top of the guide rail. The guide rail (C) Fig. 25, can be adjusted up or down at either end. After you are certain the guide rail is parallel with the table surface, firmly tighten the two hex nuts that fasten the guide rail to the table. NOTE: If a bolt was inserted through a sheet metal extension wing on the left side of the saw, tighten that nut also.

8.Move the square (H) Fig. 26, to the end of the Unifence table and check to make certain the same distance is maintained from the top surface of the extension table (K) to the top surface of the guide rail (C). Move the front table support (L) Fig. 27, against the guide rail (C), and tighten the 1/4-20 nut (M). Tighten two wood screws, one of which is shown at (N) Fig. 27, that fasten the Unifence table to the guide rail.

ASSEMBLING RAIL STOP

1.Insert 1/4-20x2" bolt (A) through hole into one side of bracket (B) Fig. 28.

2.Place one washer (C), on bolt (A), and slide bolt through flip stop (D) Fig. 28.

3.Place the other washer (C), on bolt (A), and slide bolt

(A) through other side of bracket (B) Fig. 28.

4.Screw nut (E) onto bolt (A) and tighten.

5.Insert bolt (F) through bracket (B) as shown and screw knob (G) onto bolt (F) approximately 3 complete turns. Fig. 28.

6.Attach rail stop to unifence as shown in Fig. 30.

7.Using a rubber mallet (P) Fig. 29, or a hammer and a block of wood, gently tap end cap (R) into both ends of the guide rail. NOTE: To avoid damage to the guide rail, DO NOT use a metal hammer directly against the guide rail.

H

C

Fig. 25

H

K

C

Fig. 26

C NLM

Fig. 27

E

F

B

C

D

G

A

 

 

 

Fig. 28

 

9

Page 8 Page 10
Page 9
Image 9
Delta 36-902 instruction manual Assembling Rail Stop
Page 8 Page 10

36-902 specifications

The Delta 36-902 is a powerful and versatile table saw designed for both professional woodworkers and serious DIY enthusiasts. Known for its exceptional precision and robust build quality, this saw has become a staple in workshops around the globe. This article will explore the main features, technologies, and characteristics of the Delta 36-902, highlighting its efficiency and functionality.

One of the standout features of the Delta 36-902 is its 15-amp motor, which delivers impressive power for cutting through a wide range of materials, including hardwoods and engineered wood. The motor provides up to 4,800 RPM, allowing for smooth and clean cuts. This is complemented by a heavy-duty cast iron table that measures 27 x 40 inches, providing substantial workspace for larger projects and ensuring stability during use.

The Delta 36-902 features a patented Unifence system that allows for easy adjustments and precise measurements. The fence can be easily moved, locked, and adjusted, providing unmatched accuracy for rip cuts. Additionally, it features an extensive cutting capacity, allowing for a maximum rip width of 30 inches, making it suitable for larger panels.

Another innovative technology integrated into the Delta 36-902 is its blade raising and lowering mechanism. This easy-to-operate crank allows for quick height adjustments, ensuring users can switch between various cutting depths efficiently. The saw also incorporates a high-quality blade guard system that enhances user safety, minimizing exposure to the blade while maximizing visibility.

The Delta 36-902 is built with user convenience in mind. It includes onboard storage for accessories, such as blades and wrenches, ensuring everything is organized and within easy reach. Additionally, its portability features, including a sturdy wheeled stand, make it easy to move the saw in and out of the workshop, providing versatility for different working environments.

Overall, the Delta 36-902 table saw combines robust construction, advanced technology, and user-friendly design, making it a preferred choice for woodworkers who prioritize precision and efficiency. With its powerful motor, extensive cutting capacity, and safety features, it is well-suited for a variety of woodworking tasks, from intricate joinery to large-scale panel cuts. Whether for professional use or home projects, the Delta 36-902 proves to be a reliable and effective tool.
Top Page Image Contents