UNPACKING AND CLEANING
Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax. ILLUSTRATIONS ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING
OR ACCESSORIES AND MAY BE INTENDED TO ILLUSTRATE TECHNIQUE ONLY
Fig. 2
1 - Blower and motor assembly
2 -
1
6
3 -
4 - Base
5 - Intake Port
Caps (3)
6 - Intake Ports
7 - Support Drum
Fig. 3
8 - Filter bag
9 - Locking bands for filter and dust collection bags (2)
2
3
7
5
10 - Dust collection bag
11 - Support rod
12 - Support rod extension
13 - 5/16 - 18 x 5/8
hex head screws (48)
14 - 5/16 - 18 hex nuts (6)
15 - 5/16 lockwashers (48)
16 - 5/16 x 7/8 O.D.
flat washers (26)
17 - M4.2 x 12 sheet metal screws (4)
18 - Drum supports (2)
19 - Dust chute
20 - Swivel caster assemblies (4)
21 - “U” bracket for filter bag support rod
22 - Lower Dust Bag retaining Clips (4)
*Hardware not shown
*-
*- 1/4" Lockwashers (8)
*-
4
Fig. 2
| 19 |
11 | 22 |
| |
| 20 |
8
12
21
17
16
9 
14
10
13 | 15 | 18 |
|
Fig. 3
4
