Delta 50-861, 50-866 instruction manual Unpacking and Cleaning

UNPACKING AND CLEANING

Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

1

9

8

2

3

4

5

7

6

Fig. 2

1.Base

2.Side Supports (2)

3.Hardware for Mounting Side Supports

Includes: 5/16-18 x 5/8" Hex Head Screws (4), and 5/16" Lockwashers (4)

4.Cross-Member Supports (2)

5.Hardware for Mounting Cross-Members

Includes: 5/16-18 x 5/8" Hex Head Screws (4), 5/16" Flat Washers (4), 5/16" Lockwashers (4), and 5/16-18 Hex nuts (4 )

6.Hardware for Mounting Drum Supports:

Includes 5/16-18 x 5/8" Hex Head Screws (16), 5/16" Lockwashers (16), 5/16" Flat Washers (8), and 5/16-18 Hex nuts (8)

7.Drum Supports (4)

8.Hardware for Mounting Caster Assemblies to Base.

Includes: 5/16-18 x 5/8" Hex Head Screws (24), 5/16" Lockwashers (24), and 5/16" Flat Washers (24)

9.Caster Assemblies (6)

4