Delta 70-200 instruction manual Unpacking and Cleaning, Assembling Drill Press

UNPACKING AND CLEANING

Carefully unpack the drill press and all loose items from the carton. Remove the protective coating from the machined surfaces of the drill press and all loose items. This coating may be removed with a soft cloth moist- ened with kerosene. DO NOT USE ACETONE, GASOLINE, OR LACQUER THINNER FOR THIS PURPOSE.

ASSEMBLING THE

DRILL PRESS

1.Assemble column (A) Fig. 2, to base (B) using four M-12 x 45mm long hex head screws (three of which are shown at [C]). Loosen set screw in collar (D) and remove collar (D) and raising rack (E).

2.Remove bolt (F) Fig. 3, and remove table (G) from table bracket (H).

D

E

A

B

C

Fig. 2

H

GF

Fig. 3

6