Delta (Model 31-300) instruction

Sanding Center 6" Belt/12" Disc Sander

(Model 31-300)

INSTRUCTION MANUAL

PART NO. 913131 - 04-12-05

Copyright © 2005 Delta Machinery

To learn more about DELTA MACHINERY

visit our website at: www.deltamachinery.com.

For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Delta (Model 31-300) instruction manual Sanding Center 6 Belt/12 Disc Sander

Contents

Sanding Center 6 Belt/12 Disc Sander Important Safety Instructions Table of Contents California Proposition Safety Guidelines Definitions Important Safety Instructions General Safety Rules Refer to them often and use them to instruct others Additional Specific Safety Rules Motor Specifications Power ConnectionsGrounding Instructions Extension Cords Volt Single Phase Operation Functional Description Unpacking and Cleaning AssemblyAssembly Tools Required Assembling Stand Attaching Motor to Stand Installing Drive Belt and Belt GuardAttaching Machine to Stand Attaching Disc Table Attaching Sanding Disc Attaching Belt Table OperationStarting and Stopping the Machine Adjusting Tension Tracking of the Belt Locking Switch in the OFF PositionOverload Protection Tilting the Belt Sander Table Adjusting Sanding Belt Degrees to Belt Changing Position of Sanding ARM Tilting the Disc Sander Table Adjusting Sanding Disc Degrees to Disc Replacing Sanding Belt Power TAKE-OFF ShaftReplacing Sanding Disc Sanding Inside Curves Surfacing or Edge Sanding with Sanding BeltSanding Outside Curves END Sanding Wide Workpieces with the Belt END Sanding with the Disc Service Troubleshooting Maintenance Warranty AccessoriesPage Page Canadian PORTER-CABLE Delta Service Centers