Recording and Play Back
Deleting Recorded Data
The following procedure deletes a specific track of a song.
IMPORTANT!
•The procedure below deletes all of the data of the selected track. Note that the delete operation cannot be undone. Check to make sure you really do not need the data in digital piano memory before you perform the following steps.
1.
2.
3.
Press the RECORDER button twice so its lamp is flashing.
While holding down the FUNCTION button, press the RECORDER (L) button or METRONOME (R) button to select the track you want to delete.
Press the RECORDER button until its lamp is lit.
•This will cause the lamp of the track you selected in step 2 of this procedure to flash.
Example: If you selected Track 2 for deletion
Off | Flashing: Delete standby |
4. Once again, hold down the FUNCTION button and press the button that corresponds to the track you want to delete (RECORDER (L) or METRONOME (R)).
•This deletes the selected track and enters playback standby.
•To cancel the delete operation at any time, press the RECORDER button twice so its lamp is unlit.
NOTE
•Only the digital piano’s METRONOME (R) button and RECORDER (L) button are operational from step 3 until you actually perform the delete operation in step 4. No other button operation can be performed.