Power Outlet

Your digital piano runs on standard household power. Be sure to turn off power whenever you are not using the digital piano.

Using an AC Adaptor

Use only the AC adaptor (JEITA Standard, with unified polarity plug) that comes with this digital piano. Use of a different type of AC adaptor can cause malfunction of the digital piano.

Specified AC Adaptor: AD-A12150LW

Back

AC adaptor AD-A12150LW

DC 12V terminal

Household power

Note the following important precautions to avoid damage to the power cord.

During Use

Never pull on the cord with excessive force.

Never repeatedly pull on the cord.

Never twist the cord at the base of the plug or connector.

The power cord should not be stretched tight while it is in use.

During Movement

Before moving the digital piano, be sure to unplug the AC adaptor from the power outlet.

During Storage

Loop and bundle the power cord, but never wind it around the AC adaptor.

IMPORTANT!

Never connect the AC adaptor (JEITA Standard, with unified polarity plug) that comes with this digital piano to any other device besides this piano. Doing so creates the risk of malfunction.

Make sure the digital piano is turned off before plugging in or unplugging the AC adaptor.

The AC adaptor will become warm to the touch after very long use. This is normal and does not indicate malfunction.

AC Plug Configurations

Depending on the geographic area, your digital piano may come with a second AC plug. Use the AC plug that matches the configuration of the wall outlet in your area.

The AC adaptor is shipped from the factory with one of the AC plugs shown below installed.

To change the AC plug

Perform the following steps when you need to change the AC plug that is installed on the AC adaptor.

1. Slide the plug in the direction of the arrow in Figure 1, and remove it from the AC adaptor.

 

Figure 1

2. Align the plug that

 

matches the power outlet

 

of your area with the AC

 

adaptor slots. Slide it in

 

place in the direction of

Figure 2

the arrow shown in

 

Figure 2.

 

3. Press the part indicated by the arrow in Figure 3 until the plug clicks securely into place.

Figure 3

IMPORTANT!

• Should the AC plug come off of the AC adaptor, slide it back on as shown in the illustration. Slide the AC plug along the rails on the AC adaptor as far as it will go, until it locks securely in place.

E-4