Connections
IMPORTANT!
•Whenever connecting something to the digital piano, first use the VOLUME controller to set the volume to a low level. After connecting, you can adjust the volume to the level you want.
Connecting Headphones
Left side
PHONES jacks
Commercially available headphones
Stereo mini plug
Connect commercially available headphones to the PHONES jacks. Connecting headphones to either of the PHONES jack cuts off output to the speakers, which means you can practice even late at night without bothering others. To protect your hearing, make sure that you do not set the volume level too high when using headphones.
NOTE
•Be sure to push the headphones plug into the PHONES jacks as far as it will go. If you don’t, you may hear sound from only one side of the headphones.
•If the plug of the headphones you are using does not match the PHONES jacks, use the applicable commercially available adaptor plug.
•If you are using headphones that require an adaptor plug, make sure you do not leave the adaptor plugged in when you unplug the headphones. If you do, nothing will sound from the speakers when you play.
Connecting Audio Equipment or an Amplifier
You can connect audio equipment or a music amplifier to the digital piano and then play through external speakers for more powerful volume and better sound quality.
To either of the digital piano’s PHONES jack
Pin plug | Audio amplifier AUX IN jack, etc. | |
| ||
| RIGHT (Red) |
|
| LEFT (White) |
|
Stereo mini plug |
| Guitar amplifier |
|
| |
Pin plug (white) |
| Keyboard amplifier, etc. |
|
| |
|
| INPUT 1 |
Pin plug (red) |
| INPUT 2 |
|
| |
| Pin jack | Standard plug |
Connecting Audio Equipment (Figure 1)
Use commercially available connecting cords (Mini Plug × 1, Pin Plugs × 2) to connect as shown in Figure 1. Make sure that the end of the cord that you connect to the digital piano is a stereo mini plug. A monaural standard plug will result in output of only one of the two stereo channels. Normally, you should set the input selector of the audio equipment to the terminal where the digital piano is connected (AUX IN, etc.) Adjust volume using the digital piano’s VOLUME controller.
Connecting a Music Amplifier (Figure 2)
Connect the connecting cord* to one of the types of amplifiers shown in Figure 2.
Adjust volume using the digital piano’s VOLUME controller.
*Digital Piano: Stereo mini plug
Amplifier : Inputs signals for the left and right channels. Not connecting either plug will result in output of only one of the two stereo channels.
English