2007-10-12 5011644101-PDT1 | Delta Electronics CME-PD01

2007-10-12

5011644101-PDT1

Profibus Communication Module (CME-PD01) Instruction Sheet

Profibus is a registered trademark of Profibus International.

Please thoroughly read and understand the following contents to ensure correct use before operation.

The content of this instruction sheet may be revised without prior notice. Please consult our distributors or download the most updated version at http://www.delta.com.tw/industrialautomation

A.Panel Appearance

Address Switches NET LED SP LED

NET SP

ADDH ADDL

CME-P D01

RS-485 (RJ45)

1: Reserved

2: EV

3: GND

4: SG-

5: SG+

6: Reserved

7: Reserved

8: Reserved

Profibus-DP

Interface (DB9)

1.SP LED: Indicating the connection status between VFD-E and CME-PD01.

2.NET LED: Indicating the connection status between CME-PD01 and PROFIBUS-DP.

3.Address Switches: Setting the address of CME-PD01 on PROFIBUS-DP network.

4.RS-485 Interface (RJ45): Connecting to VFD-E, and supply power to CME-PD01.

5.PROFIBUS-DP Interface (DB9): 9-PIN connector that connects to PROFIBUS-DP network.

6.Extended Socket: 4-PIN socket that connects to PROFIBUS-DP network.

C.Parameters Setting in VFD-E

	VFD-E
Baud Rate 9600	Pr.09.01=1
RTU 8, N, 2	Pr.09.04=3
Freq. Source	Pr.02.00=3
Command Source	Pr.02.01=3

D.Power Supply

The power of CME-PD01 is supplied from VFD-E. Please connect VFD-E to CME-PD01 by using 8 pins RJ-45 cable, which is packed together with CME-PD01. After connection is completed, CME-PD01 is powered whenever power is applied to VFD-E.

E.PROFIBUS Address

CME-PD01 has two rotary s select the PROFIBUS address. The set value via 2 address switches, ADDH and ADDL, is in HEX format. ADDH sets the upper 4 bits, and ADDL sets the lower 4 bits of the PROFIBUS address.