Delta Electronics manual The Delphi DNM and DNL Series of SIP type POL converters, Purpose

Evaluation Procedure

(DEP-001 A)

The Delphi DNM and DNL Series of SIP type POL converters

The DNM and DNL, 2.4~5.5V or 10~14V input, programmable output, non-isolated point of load DC/DC converters, are the latest offering from one of the world’s largest power supply manufacturers ― Delta Electronics, Inc. The DNM and DNL product family also has a flexible, programmable tracking feature, which provides a variety of startup voltages as well as sequencing and tracking between power modules. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. All models possess a myriad of standard protection features.

This document guides the user through the evaluation procedures to qualify a POL module. The data shown in this Evaluation Procedure is for the SIP Package Type POL evaluation board. Please refer to the data sheet for detailed performance and technical information for the specific POL units.

DNM, DNL SIP Series

1.0 Purpose

This document guides the user in performing electronic measurements on a DNM and DNL POL (point of load) DC/DC converter by using the Delta Evaluation Board.

2.0 Relevant Documentation

The documentation and background information listed below is relevant to this evaluation procedure:

2.1Appropriate date sheet for the DNM or DNL Series units.

2.2Power Module Evaluation Board Schematic.

2.3Power Module Evaluation Board Layout.

2.4General Test and Safety Procedures.

Evaluation Procedure

EP_DNML_SIP_08062004

1

Delta Electronics, Inc.