OPEP-33-A4Q1RI
DELTA ELECTRONICS, INC.
2 Revision: S3
12/20/2007
www.deltaww.com
Parameter Symbol Min. Typ. Max. Unit Note
Storage Temperature Ts -40 85 ºC
Storage Ambient Humidity HA 5 95 %
Power Supply Voltage VCC -0.3 4 V
Signal Input Voltage -0.3 Vcc+0.3 V
Receiver Damage Threshold +2 dBm
Lead Soldering Temperature TSOLD 260 ºC
Lead Soldering Time tSOLD 10 sec
Parameter Symbol Min. Typ. Max. Unit Note
Operating Case Temperature TC -20 +85 ºC Note (1)
Ambient Humidity HA 5 85 %
Non-condensing
Power Supply Voltage VCC 3.13 3.3 3.47 V
Power Supply Current ICC 300 mA
Power Supply Noise Rejection 100 mVp-p 100Hz to 1MHz
Data Rate 1.25
-100ppm 1.25 1.25
+100ppm Gbps
Transmission Distance 10 km
Note (1). Measured on topside of case front center
.
3. Specification of Transmitter Parameter Symbol Min. Typ. Max. Unit Note
Average Launched Power (B.O.L) PO -0.5 +4
dBm Note (1)
Average Launched Power (E.O.L) PO -1 +4.5
dBm Note (1)
Launched power (Peak.) PP +7.5
dBm
Extinction Ratio ER 9 dB
Center Wavelength λC 1260 1310 1360 nm FP Laser
Spectrum Width (RMS) σ Compliant with IEEE 802.3ah nm Note (4)
Transmitter OFF Output Power POff -45
dBm
Laser Burst On Time Ton 32
Laser Burst Off Time Toff 32
Optical Rise/Fall Time tr/tf 260 ps Note (2)
Total Jitter tJ 128 ps Note (3)
Optical Return Loss Tolerance ORLT 15 dB
Relative Intensity Noise RIN15OMA -113 dB/Hz
Optical Transmitter Reflectance -6 dB
Transmitter and Dispersion Penalty TDP 2.8 dB
Output Eye Mask
{X1,X2,Y1,Y2,Y3}
Compliant with IEEE 802.3ah
{0.22,0.375,0.20,0.20,0.30} Note (5)
Note (1). Launched power (avg.) is power coupled into a single mode fiber with master connector.
B.O.L=Before of Life; E.O.L= End of Life
Note (2). These are unfiltered 20-80% values.
Note (3). Measure at 27-1 NRZ PRBS pattern