
Note (4). Burst mode receiver timing characteristic  | 
  | |
ONU#1  | 
  | |
  | Dynamic Range  | |
Receiver Optical  | ONU#2  | |
Input Signal  | ||
  | 
Receiver Electrical Output Signal

Guard Time
ONU#1  | ONU#2  | 
 BER @10 −12
Receiver Threshold Setting Time
5. Electrical Interface Characteristics
Parameter | 
  | Symbol  | Min.  | Typ.  | Max.  | Unit  | Note  | 
Transmitter | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
Total Supply Current  | 
  | ICC  | 
  | 
  | A  | mA  | Note (1)  | 
Differential line input Impedance  | 
  | RIN  | 80  | 100  | 120  | Ohm  | 
  | 
Differential Data Input Swing  | 
  | VDT  | 400  | 
  | 1600  | 
  | |
Data Input Voltage- High  | 
  | 
  | V  | LVPECL  | |||
Data Input Voltage- Low  | 
  | 
  | V  | ||||
  | 
  | 
  | |||||
Transmitter Disable   | 
  | VDISH  | 2  | 
  | Vcc  | V  | LVTTL | 
Transmitter Disable   | 
  | VDISL  | 0  | 
  | 0.8  | V  | |
  | 
  | 
  | |||||
Receiver | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
Total Supply Current  | 
  | ICC  | 
  | 
  | B  | mA  | Note (1)  | 
Differential Data Output Swing  | 
  | VDR  | 400  | 
  | 1800  | 
  | |
Data Output   | 
  | 
  | V  | LVPECL  | |||
Data Output   | 
  | 
  | V  | ||||
  | 
  | 
  | |||||
Signal Detect Output   | 
  | VLOSH  | 2  | 
  | Vcc+0.3  | V  | LVTTL  | 
Signal Detect Output   | 
  | VLOSL  | 0  | 
  | 0.8  | V  | |
  | 
  | 
  | |||||
Note (1). A (TX)+ B (RX) = 350mA  | (Not include termination circuit)  | 
  | 
  | 
  | |||
4  | Revision: S0  | 
  | 10/12/2006  | 
DELTA ELECTRONICS, INC.  | www.deltaww.com  |