Delta Electronics OPT-155Axxxx manual Absolute Maximum Ratings, Recommended Operating Conditions

OPT-155Axxxx

Absolute Maximum Ratings

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Storage Temperature	Ts	-40		85	℃
Lead Soldering Temperature	Tsold			260	℃
Lead Soldering Time	tsold			10	Second
Supply Voltage	Vcc	0		6	V

Recommended Operating Conditions

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Data Rate		100	155.52	200	Mbps
Ambient Operating Temperature	TA	0		70	℃
Supply Voltage	Vcc				V
OPT-155A1Hxx		4.75	5	5.25
OPT-155A2Hxx		3.15	3.3	3.45

Electrical Characteristics

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Transmitter
Transmitter Data Input Voltage-Low	VIL-Vcc	-1.81		-1.48	V
Transmitter Data Input Voltage-High	VIH-Vcc	-1.16		-0.88	V
Receiver
Data Output Voltage-Low	VOL-Vcc	-1.95		-1.62	V
Data Outpot Voltage-High	VOH-Vcc	-1.045		-0.74	V
SD Output Voltage-Low	VSDL-Vcc	-1.95		-1.62	V
SD Output Voltage-High	VSDH-Vcc	-1.045		-0.74	V

Optical Characteristics

(Data Rate = 155.52Mbps, PRBS=223 -1, NRZ, 62.5/125um MMF)

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Transmitter
Supply Current	Icc			185	mA	OPT-155A1 Series
				165	mA	OPT-155A2 Series
Mean Launch Power
62.5/125um, NA=0.275 Fiber	Po	-20		-14	dBm
50/125um,NA=0.20 Fiber		-22.5		-14
Optical Extinction Ratio	E.R	9			dB
Center Wavelength	λc		1310		nm
Spectral Width (RMS)	σ			200	nm
Optical Risetime /Falltime	tr/rf			3.0	ns	10%~90%
Output Eye Diagram		Compliant	with ITU-T recommendation G.957
Receiver
Supply Current	Icc			145	mA	OPT-155A1 Series
				120	mA	OPT-155A2 Series
Sensitivity	PIN			-31	dBm
Input Optical Wavelength	λ	1100		1600	nm
Signal Detect-Asserted	PA			-31	dBm
Signal Detect-DeAsserted	PD	-45			dBm
Signal Detect-Hysteresis	PA-PD	0.5			dB
Overload	PSAT	-14			dBm

Note: The Sensitivity should be tested at BER of 1x10-10or better with an input signal consisting of 155Mbps,
DELTA ELECTRONICS, INC.		Jan., 2008
www.deltaww.com	2
		Rev. :0F